Question about 2001 Chrysler Town & Country

1 Answer

Replace the input speed sensor on a 2001 chrysler town and country 3.8

Posted by pastor119 on

Ad

1 Answer

Rich Norman

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 502 Answers

The input speed sensor is located directly below and a little to the right of the cooler lines that are going into the transmission. IF you are standing in from of the car, remove the air breather or anything else that prevents you from getting down in on the driver side. There are two seemingly similar plugs at 9o'clock to the rear of the motor. The one closest to the motor is the input, the one further back is the out put.

It just unscrews and you screw the new on in.

Hope this helps

Posted on Nov 03, 2009

Ad

1 Related Answer

keemo68

Ronald Mueller

  • 1263 Answers

SOURCE: radiator fan relay,2001 chrysler town country

the relay is located in the power distribution box under the hood the relay will be a square black or gray cube just pull out and make sure you rerplace it with the same type relay. refer to your owners manual for any questions regarding the fuses and relays

Posted on May 08, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why my 2001 town & country 3.8 will not shift gears?


p1784 shift up /down wire open,,,P0700 Transmission Control System Malfunction

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com

P0732 Gear 2 Incorrect ratio

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com

Apr 23, 2015 | 2001 Chrysler Town & Country

3 Answers

How to replace speed sensor on 2001 Chrysler Town and Country?


output speed sensor is the same thing. Sending a picture. It unscrews. Look straight down between the radiator and transmission.
25657330-cjo2jczcqc4pn4ns3k2s1t1v-3-0.gif

Apr 20, 2015 | 2001 Chrysler Town and Country

1 Answer

Where is the speed sending unit located on a chrysler town and country


transaxle has two speed sensors input speed sensor located behind transaxle cooler lines the output sensor located far right transmission case driver side.

Jan 04, 2013 | 2002 Chrysler Town & Country

1 Answer

My Chrysler Town and Country 2001 is in limp mode.


you cant get rid of the issue until you find the cause and fix it. i would not recommend throwing any more parts at it, get someone with a scan tool and see what codes are there before you waste any more money
.

May 21, 2012 | 2001 Chrysler Town & Country

1 Answer

How locate and replace the speed sensor on 2000 town and country


Input shaft speed sensor or output shaft speed sensor?

Jul 01, 2010 | 1996 Chrysler Town & Country

2 Answers

Where is the speed sensor in town & country 2001


There are 2 speed sensors on your vehicle, an input speed sensor and an output speed sensor. Below is a pic showing the front of your transmission. The input sensor is closest to the engine. Both sensors look the same.

003baae.gif

Jun 10, 2009 | Chrysler Town and Country Cars & Trucks

1 Answer

Locassion of output speed sensor on 2003 Town and Country


The input and output speed sensors look identical on the connector side. The one over the solenoid pack is the input, the one closer to the left frame rail or left front wheel is the output sensor. I hope this helps.

Apr 26, 2009 | Chrysler Town and Country Cars & Trucks

1 Answer

Country speedometer doesn't work and won't shift out of 1st gear


transmission speed sensor needs replacing about 40.oo$ at the dealer sits on the right side of transmission looking from the front of the radiator g s.

Apr 17, 2009 | 2001 Chrysler Town & Country

1 Answer

Transmission


you need to have the trouble codes read go to autozone they can read them for you and write them down and report back it is most likley a speed sensor on the transmission there is two of them and they are very cheap and easy to change called input /output speed sensors
1 05014469AA Wiring Repair Package, Input Speed Sensor
1 05014471AA Wiring Repair Package, Output Speed Sensor you dont need to use the wiring harness supllied with these sensors as they are for early model vans only please rate -jeff

Aug 23, 2008 | 2001 Chrysler Town & Country

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

769 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...