Trying to change the time on the clock on the radio how do i do it or can someone send me pages from the manual to show how , email [email protected]. the car is actually a 2001 toyota echo but there was no valid product to put in so just used the corrolla to get problem posted

open glove box
read users guide.
if lost
google it , it is free.
many cars the clock is in the radio and , some cars had 10 radio options and no 2 are the same. so don;t loses the users guide
it matches your car and option
even your country will have different clocks. in car.
page 116

https://www.carmanualsonline.info/nissan-sentra-2004-b15-5-g-owners-manual/?srch=clock

https://my.gm.com/content/dam/gmownercenter/gmna/dynamic/manuals/2006/saturn/ion/2006_saturn_ion_owners.pdf

Look at pages 3-49 and 3-50 to reset radio clock time
Helpful??

I can not find anything on clock am or pm in the owners manual. Are you sure that option is available?

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save the time change. 5. To exit, press any button/knob or wait five seconds http://www.chryslercommercialvehicles.com/jeep/download/pdf/manuals/2014-Patriot-OM-1st.pdf page 240

see if you can find the menu for the radio as it will have a language section there for selection
clarion tech experts on line can advise on how to change it or a radio shop that specialises in clarion will know how to change it.

Hello, here is the instructions for setting the clock

RDS Clock Time Broadcasters can choose to send clock time information in the RDS data. This information can be used to update the clock time on the radio. RDS clock time is broadcasted once a minute. To set the clock using RDS clock data perform the following:

• Press and hold the HR and MIN buttons together for two or more seconds to update the time.
• The display will show "UPDATED" after receiving the broadcasted time data. • If the broadcaster is not broadcasting the time data, the radio will display "NO UPDATE" and the time remains unchanged.

if this doesnt work, just simply push and hold the hr and minute buttons to set the time
• Press and hold the HR and MIN buttons together for two or more seconds to update the time. • The display will show "UPDATED" after receiving the broadcasted time data. • If the broadcaster is not broadcasting the time data, the radio will display "NO UPDATE" and the time remains unchanged.

For the clock: Turn the radio on Push and hold in the clock button And push the seek button (left) for hours And push the seek button (right) for minutes There is no AM or PM
For the radio: Find a radio station on the radio Push one of the selector buttons on the radio and hold it down for about 10 seconds and release That's all it takes You should have 5 buttons for AM And 5 buttons for FM-1 And 5 buttons for FM-2

Good luck

Try this, put the key in the ignition and let it be on the first turn right marked "ACC" or you can turn off the stereo and you will notice that only the Digital Clock screen will show. Turn the Volume/Audio/Sel knob and press on the "DISP" button simultaneously for about 4 seconds then release the "DISP" button. The digital clock will start blinking, and then use the Tune/Seek arrows pointing up and down to change the time. If the hour digit is blinking change the hour and after you have changed it press "DISP" then the minute digit will start to blink change it using the arrows, when you are done press "DISP" again or leave the clock for between 4 to 8 seconds the clock will start working normally.

I hope this works for you.

Good luck!

Aquinas

My manual said the same thing. Although I have never had the radio stop working on me even after I changed the battery. To set the clock you hold the mode button, like your changing the bass/ treble. Hold it down then it will show clock flashing. From there I cant remember i think i used the arrows by the number pad to change the time. Hope this works for you.

There should be buttons somewhere on the radio with small markings HR and MN. Try holding them down if they don't do anything immediately. You may also have to turn off the radio.
try any of the up/down audio adjust buttons, with the radio turned off.