1998 TF rodeo had electric door locks on some vehicles but there was no keyless entry remote on these vehicles. if you have a separate remote from the ignition key it could be an after market remote system.
if your trying to program the ignition key to start the vehicle this must be done by dealer with tech2
this is the case for Australian vehicles
later vehicles had a heart(rounded) shape keyless enty remote with 2 buttons and had red and green led for each button, which needs programming into system with tech2 by dealer
Jackaroo (Trooper) and Frontera had long rectangle 2 button remote which can be programmed into system by sequence of cycling ignition key opening and closing drivers door which newer rodeos went back to
each vehicles sequence is slightly different depending on year and vehicle.
here is jackaroo sequence to program additional remote into system
gee can't read that so i've now typed it out, this is for jackaroo/monterey/trooper, frontera is similar.
1/ ensure all doors and bonnet are closed, the ignition is "OFF" and the dome light is "OFF"
2/ insert the mechanical key in ignition,open drivers door
3/ operate the ignition switch from "OFF - ON - OFF" 3 times within 5 seconds
4/ close then open drivers door 2 times within 10 seconds
5/ operate the ignition switch from "OFF - ON - OFF" 3 times within 10 seconds
6/ close and open drivers door 1 time
7/ confirm 2 "LOCK - UNLOCK" responses from the drivers door snib button
8/ operate the "LOCK and UNLOCK" buttons on the new key pad
9/ confirm 2 "LOCK _ UNLOCK" responses from drivers door snib button
10/ operate the "LOCK - UNLOCK" button on new key pad
11/ confirm a "LOCK - UNLOCK" response from drivers door snib button
12/ the new keypad ID has been accepted
NOTE: all operations must be performed within the specified time frames(quickly)
should the door lock snib cycle 3 times at any stage of this procedure, the module has aborted the programming sequence
a maximum of 4 keypads can be programmed into system
×
1,185 views
Usually answered in minutes!
It is a 98 Rodeo, I dont know why it came up as a 2004? I have tried the soluction at program your remote, but that does not work..
what year is this 2004 or 1998?
×