Question about 1992 Ford Crown Victoria
It seems like the lock-up torque converter in my 92 Crown Victoria is jumping in and out of lock-up mode when the engine drags down, before the transmission downshifts. What could be causing this? The transmission does not seem to be slipping under hard acceleration. Just the problem with the torque.
hi if the torque coverter is faulty it will not run right as this is what transferes the engines power to the box change it before it damages the box that will be expensive as the metal parts in the coverter will break up and will transfere it through your box if it hasn,t allready done so best of luck yates210456
Posted on Oct 13, 2008
remove the door panel. be very careful and make sure you get all the screws out. Should be maybe 2 on the bottom half of the door, and 2 on the top half. one is right by the handle, which is the one i forgot the first time i took my door pannel off. carefully pull the panel upward, and outward at the same time. Once the panel is off, disconnect the controls, and remove the light from the panel. Remove the plastic cover very carefully, it will tear, just keeps noise, and air, and the elements out.
There will be 3 screws, they are torx bolts, once you pull those 3 out. They are located middle of the door towards the right side. The motor will drop down a little bit. disconnect the wires for the motor, and wiggle the motor off of the regulator. the crown vics have a decent size hole to get into the door panel, you can also remove the speaker if that would help you do it. other than that, it just lining up the new motor into the car, pushing it into the regulator, and putting the 3 bolts in, make sure they are snug, and not cross threaded. put everything back together, and your set.
Posted on Mar 19, 2009
You can purchase the wiring diagram for $5.99 from the following site: http://www.wiring-diagram.com/. You can also purchase a wiring diagram book from the following link: http://cgi.ebay.com/ebaymotors/2008-FORD-CROWN-VICTORIA-MARQUIS-WIRING-DIAGRAM-MANUAL_W0QQitemZ120394723100QQcmdZViewItemQQimsxZ20090320?IMSfp=TL090320147007r15080.
Hope this helps,
Posted on Mar 23, 2009
Tips for a great answer:
Aug 30, 2014 | 1992 Ford Crown Victoria
May 18, 2010 | 1997 Ford Crown Victoria
Jun 25, 2009 | 2001 Ford Crown Victoria
Jun 17, 2009 | 1992 Chevrolet Lumina
Jun 05, 2009 | 1995 Ford Crown Victoria
118 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: