Question about 1998 Ford Windstar
PLEASE DON'T FORGET TO RATE!!!
Accessory serpentine belt routing-3.0L engine
Accessory serpentine belt routing-3.8L engine
Posted on Oct 25, 2009
Need diagram of belt 2000 windstar
Posted on Mar 24, 2010
SOURCE: serpentine belt diagram:
The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.
Posted on Jul 18, 2008
SOURCE: serpentine belt diagram
The serpentine belt routing should be labeled on your radiator shroud. Look around the engine compartment like the hood or radiator fram suport and there should be a label with the the belt routing.
Good luck and hope this helps
Posted on Apr 19, 2009
I found the diagram in my owner's manual.
I replaced the belt on mine just 2 days ago. All you need to do is remove one bolt from the lower motor mount and remove the spacer. After you relieve the belt tensioner, the belt will slip right through the gap. Don't forget to support the engine before removing the bolt. As a backup I took a photo of the belt with my digital camera beforehand... just in case.
Posted on Sep 23, 2009
Tips for a great answer:
May 22, 2016 | 2011 Dodge Ram 2500
Dec 28, 2015 | 1999 Oldsmobile Cutlass
Dec 21, 2015 | Ford Cars & Trucks
Sep 21, 2011 | 2003 Chevrolet Impala
Oct 26, 2009 | 2002 Cadillac Escalade Ext
Aug 15, 2009 | 1994 Buick LeSabre
Jun 27, 2008 | 1993 Dodge Caravan
2,328 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: