- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
where is the fuel system relay located at?I have replaced the distributer 2 times and also the... 1992 Acura Integra. fuel pump???? The car does not start unless I ...
their is a cover behind the headlight ,either a rubber one or a plastic one ,remove the wiring plug then push the spring clip down and pull it back so it comes free ,then the bulb can pulled out
I recommending checking your ignition coil as there is most likely a hairline crack that is allowing moisture to get in. Take a hair dryer and blow it on the coil for several minutes after you've washed your car and if it starts, then it's definitely the coil... it's very common
suggest the first thing you do, is to pull the codes off the ECM, and go from there...more than likely it's a TPI, idle sensor or fuel pump relay thats dirty or sticking thats causeing the problem... Your local AutoZone can perform the scan and explain the results to you...free of charge. Good luck, hope this helps,please rate me a fixya.
×