1994 Ford F250 Supercab Logo
Posted on Oct 24, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

1994 Ford f250-Remote key pad won't unlock doors so opened with

1994 ford f-250 - Remote key pad won't unlock doors so opened with the key. Heard a ticking sound, Doors automatically relocked in about a min. Truck wouldn't do anything when key turned to start. Son in law pushed a little silver button by brake pedal with key turned to accessory. After a few tries, car started and ticking stopped BUT entry pad still does not work even with a new battery. I'm afraid to drive for fear the anti theft device will shut down the engine again. Please advise

1 Answer

Jon Adamson

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Sergeant:

An expert that has over 500 points.

  • Ford Expert 167 Answers
  • Posted on Oct 24, 2009
Jon Adamson
Ford Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Sergeant:

An expert that has over 500 points.

Joined: Oct 24, 2009
Answers
167
Questions
2
Helped
101342
Points
508

You have an aftermarket alarm (factory system did not have a "valet switch") Have it removed or replaced.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Just bought a 1999 ford explorer xlt don't have

You need a NGS (Ford factory scan tool) They can access the RAP KEYCODE PID.
2helpful
1answer

1994 F-250 Heater Core

Answer for a 1995 F250:

Remove the glove-box door. Behind that is the heater core cover on the interior, passenger side of the firewall. Remove that cover and there is the heater core. Open the hood and look where the heater hoses enter the front right passenger area of the exterior side of the firewall. Disconnect the two heater hose clamps and you can then remove the heater core.
0helpful
1answer

How do you re-program the security code on a 2007

FORD KEY PADS
  • Enter permanent factory code
  • Press the 1/2 button within 5 seconds to enter programming mode
  • Within 5 seconds enter new code, doors will lock, unlock to verify code, this erases previous codes remotes will also need to be programmed. (MAYBE)
KEY PADS/REMOTES
  • Insert key, turn ignition off-to- on eight times in succession, ending with key in on position doors will lock, unlock to verify in programming mode
  • Press any button on new remote, doors will lock, unlock to verify
  • Do the previous step with the second remote, doors will lock unlock to verify.
  • Turn ignition off. Doors will again lock, unlock to verify.
NOTE-Some vehicles use 5 turns of the key instead of 8
2helpful
1answer

1994 ford explorer limited anti-theft

Two tips:
* If your anti-theft system is sounding (horn honking/lights flashing)you press the panic button on your key fob to shut it off.

* If your anti-theft system is armed (but not triggered) it is disarmed when you unlock the door(s) using your unlock button on your keyfob, the key pad on the driver's door, or your key.

Hope help with this. Good luck (remember rated this).
1helpful
2answers

Ford Mondeo rear brake pads replacement

Hi,
I have ford mondeo ghia 2002.
when i press the button on the remote-key, I can lock and unlock the powerlock (in the door).
When I press the button un the door, not all doors are locked.

What's the reason?
thnak's
0helpful
1answer
0helpful
1answer

Ready remote Brand after market keyless entry remote start the Door lock /Unlock feature wont work when the button is pushed i can hear the unit beep but nothing happens at all all other features work...

that is because the push button pad is broken inside the remote box unit or either it is not making contact with the switch in the alarm remote. may need to replace the push button remote box.
1helpful
1answer

Drivers power lock will not unlock with remote.

the door lock actuator is defective, they get really hard to move when they go bad, that is why the difficulty with the key.
0helpful
1answer

1994 Ford F250 alarm problem

use the key to lock the vehicle door the push the alarm activate button. push the deactivate button and unlock the door this should do the trick. please rate the solution. thanks
Not finding what you are looking for?

311 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...