My 95 mustang had over heated, has blowing head gaskets and it won't start what do i need to do to fix it?

I think this link will help
https://www.stangnet.com/mustang-forums/threads/a-c-problem-on-95-gt.641508/

engine got probably way too too hot could blowed head gasket cracked cylinder head.depends on how low coolant got if coolant level got close empty probably got engine damage.if coolant didnt get too low wait until engine cool down try cranking it.engine could have got so hot burned out ignition module.

Could be head gasket,try head gasket fix.Could work.

sounds like a head and or head gasket problem when u overheat u can damage warp head or blow head gasket look at oil if milky look possible getting/having antifreeze leak into oil or if white smoke coming from rear exhaust sign of antifreeze getting into cylinder

check that the tap is not outside the firewall or even in the back of the head

If it's getting fire and fuel would suggest timing issue. Maybe check crank and cam sensors. Getting any check engine light?

sounds like a blown head gasket. lust one over heat can blow a head gasket

check those fuses to make sure they are not burnt out, If all are O.K i hope you did not heat it to much and warp the head or blow head gasket.

hi.
white smoke would suggest the head gasket is blown and the smoke and the shaking and dying would be caused by coolant getting into one or more pistons and burning with the petrol.
at the very least you would need to replace the gasket and get the head skimmed.
you would also have to find out if there was an underlying problem that may have caused the gasket to blow in the first place and allow a budget to fix any remaining issues after the gasket has been repaired.

Get a compression check to find out if you have a bad head gasket, I have a 96 with the 3.8L that had the same problems at first. then it started to blow out antifreeze thru the expansion tank, the head gasket finally blew the rest of the way going down the highway