Since you replaced the bulb recently pull that bulb back out and check that the contacts are straight in that socket some times when replacing the bulb the bend and short out in to each other. if this is the case just starighten them back out and carefully replace bulb if this is not the case check the bulb out it may have the wrong wattage rating causing it to pull to many amps
The brake light switch might be shorting out, which is under the dash near the top of the brake pedal. If that checks out ok, there might be a bare wire rubbing up against the frame, somewhere between the front of the truck to the lights.
115 views
Usually answered in minutes!
The drivers side brake light bulb was replaced on 10\18\09
have you recently replaced any bulbs?
×