My car is having the same problem engine valve

Question 1

0helpful

1answer

I have a 2007 chrysler 300 touring 3.5l and my car is showing code po731 and wont go over 30 mph. What should i do I NEED HELP

Common Problems That Trigger the P0731 Code

Defective Gear 1 Shift Solenoid
Defective Forward Clutch
Defective Engine Coolant Temperature Sensor
Defective Valve Body
Dirty transmission fluid that restricts the hydraulic passages

If you aren't comfortable diagnosing these points, take it to a reputable shop.

Mar 10, 2018 • Chrysler 300 Cars & Trucks

0helpful

1answer

What would cause a knocking in the motor/engine of a 2010 Chrysler town and Country Touring

A Defective hydraulic valve lifter will make noise, it would be tapping noise, they can be very loud, but I would really need to hear what this is to determine the cause.

Feb 23, 2017 • Chrysler Cars & Trucks

0helpful

1answer

We're can I get an image of under the valve cover were the lifter are on a 2007 Chrysler 300 I took the cover off because it was knocking

This is not a typical do it yourself type of job. Camshaft and lifters should only be done by a professional. Any other internal engine work too.

Aug 17, 2015 • Chrysler Cars & Trucks

0helpful

1answer

How to get engine light off with code p0455 for my chrysler 300 2006 touring

code p0455 refers to evaporative emission (EVAP) system--large leak detected===causes--hose connection/s--intake leak---EVAP cannister--EVAP canister purge valve
first check that the filler cap is on correctly ,tight and sealing

Jun 26, 2015 • 2006 Chrysler 300 Touring

0helpful

1answer

How many valve lifters do a chrysler 300 touring have

I have a 2006 Chrysler 300 touring. Ron Carter told me they have 12 on each side of rocker so 24 in total.

Sep 28, 2012 • 2006 Chrysler 300

0helpful

1answer

Is it a hard job to replace the egr vavle on a 2005 chrysler 300 3.5 engine

the egr valve can be changed from below but the left bolt must be done blindly by feel, (use a small mirror,) undue the 2 bolts and pull it out from the intake, careful to make sure the gasket on the end of the tube comes with it;
the 2 bolts that hold the egr on also has a metal gasket;
the hardest thing is to disconnect the electrical plug from below that connects the egr valve, - do not do this if you have no mech experience;

Mar 26, 2012 • 2005 Chrysler 300

0helpful

1answer

Chrysler 300 3.5 touring. EGR Valve needs to be replaced. How much should I pay to have this replaced by a reputable auto repair shop? I had an estimate of $440.00 and was flabergasted! What do you...

if you can turn a wrench egr valves are easy just go to the library and look it up in the manual for your car and see if your skills are up to it.

May 06, 2011 • 2005 Chrysler 300

2helpful

2answers

Ticking in valve lifter, I think. How do I fix it ? and, how much does lifter cost ?

how can i solve the problem with the lifter

Jan 05, 2011 • 2006 Chrysler 300

5helpful

2answers

I have a 2007 Chrysler 300. I have a knocking noise and the mechanic said its a lifter that is stuck and would recommend a dealer. I tried the treatments from O'Reilly's and Auto Zone and they work right...

If your 300 is equipped with a 3.5L engine, high miles, sretched oil changes, the only fix is replacing the rocker shaft assemblys,
they come complete with updated lash adjusters, remove the intake,coils, covers, and rockers, should take you about a couple of hours. there is no cheap fix, sorry. GOOD LUCK. RDJRP

Jun 19, 2010 • 2006 Chrysler 300

4helpful

1answer

WHEN ENGINE IS RUNNING IT TICKS LOUDLY AND WHEN U ACCELERATE IT TICKS FASTER.

A worn valve lifter or a loose rocker arm is causing that noise.To find out which one it is, the valve covers have to come off and check each one. If the rocker arms are snug, then it's a lifter, in which case the whole top part of the engine has to come off to get at the lifters.

Mar 28, 2010 • 2006 Chrysler 300

Question 2

Ronaldbrains

Master 881 Answers
Posted on Oct 18, 2009

Ronaldbrains

Master

Joined: Sep 19, 2009

Answers

881

Questions

0

Helped

299407

Points

2375

If its a Chrysler factory problem then yes but if its not then its yours but the lifter problem can be fixed by removing rocker covers and see if its not getting the oil to them as it could be the oil filter needs changing
Check it out first before jumping up and down at them .
HOW many miles has it done Ron

Ronaldbrains Oct 19, 2009

Well if the cars still under warranty then take it back but if you are the 2nd owner or its out of warranty then I dont think you have much hope of getting any where with them BUT you can always try as you havent anything to loose

×

Related Topics:

Trustworthy Expert Solutions

My car is having the same problem engine valve

1 Answer

Ronaldbrains

Add Your Answer

Attachments: Added items

Related Questions:

I have a 2007 chrysler 300 touring 3.5l and my car is showing code po731 and wont go over 30 mph. What should i do I NEED HELP

What would cause a knocking in the motor/engine of a 2010 Chrysler town and Country Touring

We're can I get an image of under the valve cover were the lifter are on a 2007 Chrysler 300 I took the cover off because it was knocking

How to get engine light off with code p0455 for my chrysler 300 2006 touring

How many valve lifters do a chrysler 300 touring have

Is it a hard job to replace the egr vavle on a 2005 chrysler 300 3.5 engine

Chrysler 300 3.5 touring. EGR Valve needs to be replaced. How much should I pay to have this replaced by a reputable auto repair shop? I had an estimate of $440.00 and was flabergasted! What do you...

Ticking in valve lifter, I think. How do I fix it ? and, how much does lifter cost ?

I have a 2007 Chrysler 300. I have a knocking noise and the mechanic said its a lifter that is stuck and would recommend a dealer. I tried the treatments from O'Reilly's and Auto Zone and they work right...

WHEN ENGINE IS RUNNING IT TICKS LOUDLY AND WHEN U ACCELERATE IT TICKS FASTER.

Not finding what you are looking for?

2006 300

I have a 2007 chrysler 300 touring 3.5l and my car is showing code po731 and wont go over 30 mph. What should i do I NEED HELP

Ask a Question

Check Out the Latest Top Trucks Report!

Top Chrysler Experts

ZJ Limited

Thomas Perkins

john h

Are you a Chrysler Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Trustworthy Expert Solutions

My car is having the same problem engine valve

1 Answer

Ronaldbrains

Add Your Answer

Attachments: Added items

Related Questions:

I have a 2007 chrysler 300 touring 3.5l and my car is showing code po731 and wont go over 30 mph. What should i do I NEED HELP

What would cause a knocking in the motor/engine of a 2010 Chrysler town and Country Touring

We're can I get an image of under the valve cover were the lifter are on a 2007 Chrysler 300 I took the cover off because it was knocking

How to get engine light off with code p0455 for my chrysler 300 2006 touring

How many valve lifters do a chrysler 300 touring have

Is it a hard job to replace the egr vavle on a 2005 chrysler 300 3.5 engine

Chrysler 300 3.5 touring. EGR Valve needs to be replaced. How much should I pay to have this replaced by a reputable auto repair shop? I had an estimate of $440.00 and was flabergasted! What do you...

Ticking in valve lifter, I think. How do I fix it ? and, how much does lifter cost ?

I have a 2007 Chrysler 300. I have a knocking noise and the mechanic said its a lifter that is stuck and would recommend a dealer. I tried the treatments from O'Reilly's and Auto Zone and they work right...

WHEN ENGINE IS RUNNING IT TICKS LOUDLY AND WHEN U ACCELERATE IT TICKS FASTER.

Not finding what you are looking for?

2006 300

I have a 2007 chrysler 300 touring 3.5l and my car is showing code po731 and wont go over 30 mph. What should i do I NEED HELP

Related Topics

Ask a Question

Popular Questions

Chrysler 300 won't shift out of park

Free picture serpentine belt diagram 2006 chrysler 300

What does rke battery low light mean

2005 Chrysler 300 thermostat location?

How to replace egr valve

Check Out the Latest Top Trucks Report!

Top Chrysler Experts

ZJ Limited

Thomas Perkins

john h

Are you a Chrysler Expert? Answer questions, earn points and help others

Manuals & User Guides