1996 Chevrolet K1500 Logo

Question about 1996 Chevrolet K1500

3 Answers

Where is the bank 2 sensor 1 located.

Where is the bank 2 sensor 1 (oxygen sensor) located on a 1996 chevy K1500 pickup located?

Posted by bheamer on

  • 1 more comment 
  • Anonymous Mar 22, 2014

    Replaced oxygen sensor 2004 4 runner bank 1 and bank 2 sensor 1 now car won't idle and stalls

  • Anonymous Mar 22, 2014

    Already Replaced oxygen sensor 2004 4 runner bank 1 and bank 2 sensor 1 now car won't idle and stalls

  • Anonymous Mar 22, 2014

    where is the location of bank 1 02 sensor

×

Check Price eBay

3 Answers

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,803 Answers

Oxygen sensors are always numbered like this:

Bank 1 sensor 1
Bank 2 sensor 1
Bank 1 sensor 2
Bank 2 sensor 2

some manufacturers use a kind of shorthand that reads different, but means the same thing:
Sensor 1/1 or O2s 1/1
Sensor 2/1 or O2s 2/1
Sensor 1/2 or O2s 1/2
Sensor 2/2 or O2s 2/2

Bank 1 is always the side of the engine where cylinder number 1 is located and, of coarse, Bank 2 is the opposite side.
On a 4 cylinder engine, there is only 1 bank and it is always referred to as Bank 1.

Sensor 1 is always the upstream sensor (The one located BEFORE the catalytic converter)
Sensor 2 is always the downstream sensor (the one that is located AFTER the catalytic converter.

Most GM engines have #1 cylinder located on the left bank, (or Driver's Side) of the engine,

So, the answer to your question would be that you are looking for the sensor located before the catalytic converter on the right (or Passenger Side) of the truck.

Posted on Oct 17, 2009

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

Right side, front sensor.(in the exh pipe) Bank 1 is left side (where cyl 1 is located) Bank 2 is the opposite side. sensor 1 is always in front of cat converter, sensor 2 is always behind converter.

Posted on Oct 17, 2009

Bobby Memory

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 258 Answers

It's in the passenger side exhaust manifold

Posted on Oct 17, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

What is the location of bank 1 sensor 2 oxygen sensor on 1996 acura 3.2 tl v6 upstream or downstream?

sensor 2 is always downstream of the Cat.

Which 02 sensor is bank 1 sensor 2? Bank 1 Sensor 1 is the first sensor closest to the engine. On Bank 1 means it is at the engine side with cylinders 1, 3, 5, 7, etc. Bank 1 Sensor 2 is the second sensor on the engine's exhaust pipe, usually behind the catalytic converter.
Jan 26, 2022

https://www.google.com/search?q=1996+acura+3.2+tl%2C+bank+1+sensor+2+location

..
0helpful
1answer

2002 chevy express van 5.7 v8 error code PO154 Bank 2 sensor 1 oxygen sensor

That is a low signal error from the right bank upstream oxygen sensor. In most cases, it is caused by a weak oxygen sensor. Before replacing the oxygen sensor, double check fuel pressure, volume and quality. A low signal from the oxygen sensor can also be caused by a lean fuel condition.
0helpful
2answers

Where is bank 1 sensor two located on a chevy cavaier the code is p0134

Hi, P0134 indicates sensor 1. Sensor 1 is the one on the exhaust manifold. Sensor 2 is behind the catalytic converter.


jturcotte_283.jpg
30helpful
2answers

Bank 1 sensor 2 location on a 1996 chevy suburban

zjlimited_210.jpg

Fig. Fig. 3: Oxygen sensor-4.3L engines


zjlimited_211.jpg


Fig. Fig. 4: Oxygen sensor-5.0L and 5.7L engines





zjlimited_212.jpg



Fig. Fig. 5: Oxygen sensor-7.4L engines




Oxygen sensors are always numbered like this:
Bank 1 sensor 1
Bank 2 sensor 1
Bank 1 sensor 2
Bank 2 sensor 2

Some manufacturers use a kind of shorthand that reads different, but means the same thing:
Sensor 1/1 or O2s 1/1
Sensor 2/1 or O2s 2/1
Sensor 1/2 or O2s 1/2
Sensor 2/2 or O2s 2/2

Bank 1 is always the side of the engine where cylinder number 1 is located and, of coarse, Bank 2 is the opposite side.
On a 4 cylinder engine, there is only 1 bank and it is always referred to as Bank 1.

Sensor 1 is always the upstream sensor (the one located BEFORE the catalytic converter)
Sensor 2 is always the downstream sensor (the one that is located AFTER the catalytic converter.

Hope helps (remember to rate this).



0helpful
1answer

2002 nissan sentra gxe 1.8 bank2 sensor1 federal emission.Which sensor do I replace?Top/bottom,driver/pass side?

The 1.8 is a 4 cyl. engine . it has only 2 oxygen sensors . Nissan engine controll systems devides its EGO sensors into banks . Bank 1 is the upstream (top before the catylyctic converter) . Bank 2 is the downstream (after the cat. conv.) I recomend you change both for emissions reasons
2helpful
1answer

1996 chevy truck 5.7L has codes P0172, P0172 were

p0172 is--system to rich ( bank 1). an oxygen sensor on bank 1, detected a rich condition ( to little oxygen in exhaust ) v6-v8 - v10 engines, bank 1 is the side of the engine that has # 1 cylinder. causes could be a vacuum leak in a hose, a dirty or bad maf sensor, or fuel pressure or delivery problems.
15helpful
3answers

How many oxygen sensors in a 2001 chrysler sebring 3.0

17c3292.jpg

Fig. Heated Oxygen (HO2S) location (sensor 1)-2.4L engine

db6f426.jpg

Fig. Heated Oxygen (HO2S) location (sensor 2)-2.4L engine

99e413c.jpg

Fig. Heated Oxygen (HO2S) location (bank 1, sensor 2) (bank 2, sensor 2)-2.7L engine

e2a250f.jpg

Fig. Heated Oxygen (HO2S) location (bank 2, sensor 1)-2.7L engine

I hope help you with this (rated this help). Good luck.
6helpful
2answers

I HAVE A CHEVY Z71 4X4. AND THE INSPECTION FAULT CODE IS P0151. WHAT IS THE PROBLEM

Bank two oxygen sensor, located in front of the catalytic converter on the passenger side has failed. The actual code reads: P0151 - Heated Oxygen Sensor (HO2S) Circuit Low Voltage Bank 2 Sensor 1.
Not finding what you are looking for?

30,241 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22516 Answers

john h

Level 3 Expert

28844 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...