Question about 2001 Mazda Tribute

1 Answer

I need a serpentine belt routing diagram for a 2001 Mazda Tribute 4 cylinder - the one under the hood is missing

Posted by uscats1 on

Ad

1 Answer

Tom Shanks

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 138 Answers
Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does anybody have a color coded vacuum / EGR hose diagram for a 2001 mazda tribute 3.0 LX


Matthew, Vacuum hose diagram should be under hood on a decal/label, on hood it self or on rad cradle usually. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Ford Escape 3 0l V6 Engine Vacuum Leak Testing
Escape City Ford Escape Forums Ford Escape Mercury Mariner Mazda Tribute...
Remove Upper Intake Manifold 2002 Mazda Tribute Part 1 Detaching...
2001 mazda tribute 3 0 LX Detailed vacuum EGR hose routing diagram Google...

Jul 02, 2016 | Mazda Cars & Trucks

1 Answer

Accessory belt diagram


Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Feb 07, 2012 | 2001 Mazda Tribute

1 Answer

Belt routing diagram for mazda tribute


There are two types of belt, the drive belt as well as timing belt diagram. For belt routing diagram, click the link below:--- http://carbeltrouting.blogspot.com/2011/10/2001-mazda-tribute-timing-belt-diagram.html --------- This will help.Thanks.Helpmech.

Oct 25, 2011 | 2001 Mazda Tribute

1 Answer

Need a serpentine belt routing diagram for 2001


it doesn't show you under the hood near the hood latch ,newer vehicle it should. check this first.

Apr 23, 2010 | 2001 Chevrolet Malibu

1 Answer

Replacing serpentine belt


Click on the following direct Link. It has the Serpentine Belt Diagram that you will need depending on your engine size (2.0L or 3.0L) and your options (AC/No AC ect.).
http://www.2carpros.com/car_repair_information/year/2001/make/mazda/model/tribute/2001_mazda_tribute_drive_belt_routing_diagram.htm

Standard Rules to Removal the Serpentine Belt with a Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.


Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

Mar 23, 2010 | 2001 Mazda Tribute

Not finding what you are looking for?
2001 Mazda Tribute Logo

1,045 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...