Question about 1995 Land Rover Discovery

1 Answer

Hi, i have a door lock problem with a landrover discovery 1998. a) when i use the remote control the locks are clicking b) then the alarm sounds twice c) and all levers are popping up. d) situation afterwards: the alarm is activated. e) unlocking causes that the alarm is deactivated And another observation: closing the drivers door with the key is not possible. it seems like the cilinder had no conncection with the lock mechanism. My thoughts: a) cilinder or lock mechanism fault b) alarm system prompts me.

Posted by Anonymous on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 275 Answers

It sounds like you have a problem with one of the door or bonnet switches. It acts that way when it thinks there is a door or the bonnet is open. Check all the switches for good contact.

Posted on Nov 05, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY dISCOVERY rEMOTE WILL NOT UNLOCK THE BACK DDOR


It should unlock with the second click of the remove... if not it sounds like you (may) have a bad door lock actuator in the rear door

Aug 04, 2014 | Land Rover Discovery Cars & Trucks

1 Answer

I have a 1998 Land Rover Discovery with alarm problems.


Easy dont bother locking the car i never lock any of my cars if a tea leaf wants to get in then let them as i dont even bother with a CD player ,your problem will have to go to a dealer with the relevant software to be able to diagnose the problem correctly ,it could be a simple fault with a worn lock mechanism on the back of the door lock barrel though so take the door panel off and check it out before you go to the dealer

Oct 19, 2012 | 1998 Land Rover Discovery

1 Answer

2001 maxima alarm not working but panic works


ck for a fuse in the under the hood fuse box that says bsm may be blown.
Also try this.....
To reset the security system remove the negative battery cable for 30 minutes, then reconnect the cable. Next, lock and unlock the doors using the remote. This will reset the alarm system and the engine will start and fobs reset.

Here are some factory notes....FYI

Anti-Theft Systems

PROGRAMMING

NOTE: If a new Smart Entrance Control Module (SECU) is installed, a new identity code must be entered and all remote controllers must be programmed. If identity code cannot be entered, repair multi-remote system. See appropriate MULTI-REMOTE CONTROL SYSTEMS article.

PROGRAMMING > PROGRAMING NEW ID CODE

NOTE: This procedure will erase all previous identity codes and render all previously programmed remote controllers inoperative (until reprogrammed). All remote controllers to be used with system must be programmed at the same time. A maximum of 4 remote controllers can be programmed. Any attempt to program more than 4 controllers will be ignored. If same identity code is entered more than once, entry is ignored even though hazard warning lights will still flash twice.
1. Close and lock all doors. Erase original identity code(s) by inserting and completely removing key from ignition switch more than 6 times within 10 seconds. Hazard warning lights should flash twice. Turn ignition switch to ACC position.
2. Push any button on new remote controller once. Hazard warning lights should flash twice, indicating identity code has been entered. If identity code cannot be entered, repair multi-remote system. See appropriate MULTI-REMOTE CONTROL SYSTEMS article.
3. For each additional remote controller to be programmed, manually release door lock and lock again by using door panel switch and repeat step 2. If no additional remote controllers are to be used, exit programming mode by unlocking and opening driver's door.

Please let me know if you need anything else to get the problem fixed. Happy mew Year!

Jan 03, 2018 | 2001 Nissan Maxima

1 Answer

Warning lights stay on after rear collision


remote alarm may not work when any of locking mechanisms fail to lock one of doors properly. check for the rear lock first.

Dec 06, 2011 | 1997 Land Rover Discovery

2 Answers

98 Jeep how do you disengage alarm. Only have one remote


there is no way to do that being that the factory alarm is controled by the BCM (body control module) your only option is to go to the dealer and buy two new remotes and have them set to the frequency of your vehicle.

Sep 09, 2009 | 1998 Jeep Grand Cherokee

1 Answer

1998 Vw Jetta opened door with Key alarm sounded cant shut off


I had the same problem. I had lost the wiring connection between the drivers door lock (where the key goes in) and the alarm. The only way to fix this was to rewire the connection.

I am not 100% sure what breaks the connection - probably wear and tear on the wire with the door opening and closing.

This has happened to me twice in the last 5 years.

Aug 09, 2009 | 1998 Volkswagen Jetta

1 Answer

Alarm and imobiliser on a discovery 300tdi


before you cut or rewire the alarm, when welding the disco although disconecting the battery protects the battery, the imobiliser holds current, this my have gone into system factory setting, so it my be worth getting the imob and key re-conected, this is a cheap job at any Landrover specialist. hope your running smooth soon

Apr 27, 2009 | 1997 Land Rover Discovery

1 Answer

My husband has a landrover freelander, cant lock the car


first thing i would be checking is the door switches on each door if are broken or by removing switches to see if connection is broken or badly corroded also check bonnet & tailgate switches for same problem.

Mar 12, 2009 | 1996 Land Rover Range Rover

1 Answer

Landrover Discovery 2 alarm problem


Have a technician check all the earth points especially the body earth just next to the battery box,this one likes to come loose and brake off.

May 20, 2008 | 2000 Land Rover Discovery

Not finding what you are looking for?
1995 Land Rover Discovery Logo

992 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...