To remove the dash in your truck you will need to dedicate about 8-10 hours. first start with removing your kicker panels, then the plastic covers on your a-pillars. remove the bezels around your instrument panels. you should be able to see some black screws by now, they should be a 7mm some may be a 5.5mm start removing all the screws you can. next you will need to un plug all of your switches, airbags(yellow plugs), 12v accessory plugs, be sure to remove your battery cables before unplugging all of this. your dash cover is a pain to remove so be patient with it or you will break it easily. to remove your dash cover remove the screws in the front and you will have to pop the back of dash up then remove. next you will need to remove your steering wheel/column this is easily done however you will need alot of extensions for your ratchet to do this. after pulling your steering wheel/column remove the four screws by your windshield to remove your sub-dash i believe they will be a 10mm. remove your sub-dash. next you will need to remove the dash support frame, you will need a 15mm and a 10mm socket to do this, i believe there is 5 bolts holding this on. if needed you can remove the black box that holds your fan heater core blender door cab filters and etc... to do this you have to remove the ac hoses coming out of your dryer can going into the firewall, this will bleed out all of your freeon, next remove the heater hoses, now there are 7 bolts or nuts to remove on your firewall, when you remove those you can pull out the black box.
SOURCE: how to remove rear brake drum on 2005 chevy
depending on how wore down shoes are or self adjuster has pushed shoes out, you should be able to hit the face of drum with a hammer several tiems and it break loose to be removed.
SOURCE: chevy steering wheel controls
You first have to disarm and remove the air bag (unscrews with bolts from behind the steering wheel) and then you will see the screws for the switches. Only the silverado awitches will work.
SOURCE: 2005 chevy silverado won;t start.
i had the same problem, and it turned out the coil pack was moulding inside wich stopped the spark all together, i ended up changing my coil pack and putting on new wires because the ends connected to the coil were very corroded and that cures the not running part just fine
enjoy
SOURCE: how to replace spark plugs on 2005 chevy silverado
spark plug wrench and alot of patients with the very back ones hard to get to
SOURCE: How do you remove the spare tire on a Chevy 2005
There is a place at the rear, into which you put the jack handle, then turn counter clockwise and a cable releases the tire.
2,200 views
Usually answered in minutes!
×