- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is an electric actuator on the front axle that engages 4WD. This part commonly fails resulting in no 4WD. Unhook the electrical connector to this part and see if heater still blows fuses. If It does not blow the fuse, the problem is in the actuator. If it still blows the fuse then it could be in the wiring. Buy a repair manual and trace the wiring schematics.
before you think it is your heater core try replacing your thermostat or flushing your system your heater core could be clogged feel the two hoses going into the heater core at the firewall they both should be hot
Run 12V directly to the motor and see if it will run, if it dosent than the motor is bad, if it does than the resister is bad, the resister makes the blower run and also regulates the speeds for the blower, but chanses are if it was making a high pitch squeel before it quit the motor went out.