Every other time I roll the passenger window down it makes a loud bang sound and feels like its hung up on something.
On the inside trim, you can remove screws that are by the door handle,
arm rest, under door and side of door and then gently pull back on the
panel as there will also be retaining clips attached and you don't want
to break them. You'll need to lift the door panel upwards in order to
get it off the window ledge. Then you'll need to manipulate the panel
and disconnect the door handle linkage from the door handle and
disconnect the wiring for your controls. Pull back the weather seal and you should be able to see what the window is catching on.
I've seen cases where the lock cylinder comes loose and hits the window
310 views
Usually answered in minutes!
×