SOURCE: key fob not working after battery change ford focus 2006
Try reprogramming it.
1. Turn the ignition from OFF to RUN 4 times within 6 seconds.
2. Turn the ignition OFF. The system will chime to confirm programming mode.
3. Within 20 seconds, press any button on first keyless remote.
The system will chime once to confirm programming.
4. Within 20 seconds, press any button on second keyless remote.
System will chime once to confirm programming.
5. Turn ignition to RUN to exit programming mode.
SOURCE: ford focus rs alarm trouble
if its a factory alarm you put the key in and quickly turn the key on and of i cant remember if its 8 or 9 times but the horn will chirp then you push the lock and unlock on the fob the locks should respond then turn key off and your done. note that if you have more than one fob you have to press lock and unlock on all of them before you turn the key off and i believe you only have about fifteen seconds to do so if not let me know i will look it up at work
SOURCE: how do i reprogram my02 ford focus remote locking key fob please.
get in your car close door hit the unlock button then put key in the ignition cycle the key from off to on (STOP BEFORE START POSITION) cycle key off to on 7 times after the 7th trime the doors should lock the unlock automatically that means u are in trainning mode hit the unlock button on key fob. the key fob should now work if it doesn't then try changing batt
SOURCE: focus remote key fob not working
this info would cost you £30.+ at ford Radio
Frequency Programming Instructions:
SOURCE: i have a new shape ford focus (05)i cannot open
does the hatch open with the trunk release in the car as it should since it sends an electronic signal just like the key fob. The cylinder for the trunk lock is most likely seized and if you want to replace.. you'll need to remove your trim for the trunk to access the locking assembly
694 views
Usually answered in minutes!
×