Shifter is stuck in park

Billettechnologies.com sells a replacement cog to put your shifter backinto action. Their part replaces a factory plastic piece...no wonderthese are failing at a fast rate.
Here is the LINK to make this change out of parts...

I used a screw and nut to replace the plastic piece that broke. The plastic piece holds a spring end that basically keeps the car from being shifted while the brake is depressed. Lots of work to remove the shifter assembly but about 5 minutes so drill a small hole and put a nut and bolt in place of faulty engineered parts that break. Wha What!

There is a quick easy DODGE SECRET to getting your magnum out of park when this happens. Remove the cover around the shifter, look in front and locate the brake cable coming into the front of the shifter. Put your finger on the cable and feel the pink plastic part that the cable is going into in the front of the shifter. Now with your finger on this pink plastic part, crank the car, push the brake in, now push in on this pink plastic part where the cable goes into it. It will go in about half an inch, while holding it in put the car in drive and go. When you put the car in park again it will lock again and you will need to repeat these simple steps but you can drive the car and not have to pay a tow charge. I,ve been driving mine like this for two months till I get the time to fix it.

2005 dodge magnum shifter stuck in park.

First thing I would check is to see if it has brake lights??? The shifter will not release unless brake pedal is pushed and works off the same circuit.