The screws will turn but they won't come out. What do I need to do?
Get a long nose plie to lose it, while loosing it do as if you are pulling it out, continue the process till it's out
Question edited for clarity, and 'want' to 'won't'.
Question moved from Motorcycles to 'make year model' category.
Hi again Joe
Are these plastic screws? Someone has overtightened them and stripped the threads. Put one screwdriver under the screw head and twist it to add pressure and use another one to undo the screw. The outward pressure will make it follow the threads.
no they are not plastic screws. I agree someone has overtightened them.
They are metal screws! Is the heads the problem or is the nut spinning, no access to it? Stripped thread?
the plastic thing on the back side was spinning so i was able to get access to it and hold it with long nose plie i did get the screws out and fit it.
Great, well done Joe.
×
247 views
Usually answered in minutes!
×