- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You should be able to get in between the fender and tailgate with a long screwdriver or piece of flat metal and push the catch back into the tailgate. Then pull the handle to release the other side and the gate should open. Hope this helps.
latches for this are on the sides. The are connected by the handle in the middle of the gate. Latches are either stuck open (dry or frozen open) or stuck closed and you are banging on them when trying to close and "latch" gate. Get a screwdriver and while pulling up on tailgate handle make sure latches(on gate) are open to engage "striker bolt". If they are spray them liberally with WD40 or silicone SPRAY. latch and open several times to let lubricant attack rusted area on mechanism.
If latches won't open they may be stuck closed and won't open because cable going from middle handle to that side or both sides is disconnected. Does tailgate have star shaped bolts on "inside-bed-when-closed" side? If so you will need to spray these with WD40 and let set then get a star torques bit and remove them to access middle handle actuator.
there are little metal rods that connect to the handle of the tailgate, just like the rods that connect your door handles to the door hinges and lock mechanism. just pop off the plastic cover over the tailgate handle and check and see if the rods are still connected to the handle.