Where is the 2005 Toyota RAV4 drl module located

Question edited for clarity.
Question moved to model category.

Toyota Nation thinks fuses and DRL are headlight on low power.

https://www.toyotanation.com/threads/drl-relay.1640612/

eBay thinks it does.

https://www.ebay.ca/itm/164758754547

The Fuse and Relays diagram says No

Toyota Camry (XV40; 2007-2011) fuses and relays

Fuse Box Diagrams https://fuse-box.info > toyota > toyota-camry-xv40-20...

The fuse box is located under the instrument panel (on the driver's side), under the cover. The location of the fuses in the passenger compartment: Toyota Camry ...
Daytime running Lights are a function of the Body control Module.

https://www.google.com/search?q=2011+Toyota+Camry+LE+DRL+relay+location

..

located under dash on driver side fuse box

you need to get in touch with toyota they had a recall on your vehicle due to airbag.THE STEERING COLUMN ASSEMBLY CONTAINS ELECTRICAL CONNECTIONS TO THE DRIVER'S AIRBAG MODULE HOUSED IN A SPIRAL CABLE ASSEMBLY, WHICH INCLUDES A FLEXIBLE FLAT CABLE (FFC). DUE TO THE SHAPE AND LOCATION OF THE FFC'S RETAINER, THE FFC COULD BECOME DAMAGED WHEN THE STEERING WHEEL IS TURNED.
Consequence: IF THE FFC IS DAMAGED, CONNECTIVITY TO THE DRIVER'S AIR BAG MODULE COULD BE LOST AND THE AIR BAG DEACTIVATED. THE FAILURE OF THE DRIVER'S AIR BAG TO DEPLOY IN THE EVENT OF A CRASH THAT TYPICALLY NECESSITATES DEPLOYMENT INCREASES THE RISK OF INJURY TO THE DRIVER.

If you're not certified to work on the airbag system then don't mess with because you can. KILL YOUSELF OR SOMEONE ELSE LEAVE IT ALONE

Hi, I have no idea what a Drl is? If you're looking for the ECU it is usually located behind the center consul. Regards John

Please check this image.

switch failure.
HL are hot at all times. so if the switch fails, lamp on full time.
does car have those silly DRL light option, like up in Canada.?

DRL = Daylight running lights. (on all time driving)
more stuff the break with DRL. and wired different too.

The DRL (daytime running lights) module on a 2000 Savannah van is typically located under the hood, near the front of the vehicle. It may be mounted to the inner fender, the firewall, or another nearby location. In some cases, it may be necessary to remove a panel or access cover in order to locate the DRL module.
To find the DRL module, you may want to consult the owner's manual for your vehicle, as it should have detailed information on the location of various components. You can also try searching online for more specific information about the location of the DRL module on your particular model of Savannah van. If you are unable to locate the DRL module, or if you are unsure of how to access it, you may want to consider seeking the assistance of a mechanic or automotive technician.

It sounds like your DRL RELAY/Headlight relay. I had this happen with a 2000.

Please rate me if this helps You.

Here is some info that I hope is helpful to you.

This first part is how to disable the DRL
TOYOTA. From the Toyota technical service bulletin EL011-00 Web site for specific models determine where the module is; either the DRL relay or the body ECU, connector number, pin #. Oct 6,2000.

Avalon 1999 DRL relay D4 pin 1
Avalon 2000 body ECU B5 pin 6
Camry S/D 99* DRL relay D6 pin 23
Camry S/D 00* DRL relay D6 pin 10 *twilight sentinel
Camry Solara99/00* DRL relay D6 pin 23
Celica 2000* body ECU B6 pin 17
Corolla 99/00* DRL relay D3 pin 23
ECHO 2000 DRL relay D2 pin 12
4Runner 2000 DRL relay D8 pin 2
Land Cruiser 99/00 DRL relay D8 pin 2
MR2 Spyder 2000 DRL relay D2 pin 12
RAV4 99/00 DRL relay D17 pin 2
Sierra 99/00 DRL relay D4 pin 2
Tacoma 2000 DRL relay D8 pin 2
Tundra 2000 DRL relay D7 pin 2
-disconnect battery- Then remove the wire with pin attached and tape to the harness. (consider just cut and tape the wire) -check operation- [except the 2000 MY-Avalon, additionally you need to ground the wire at the module end of the cut wire]


And here is the Headlamp relay part number.

ACDELCO E1717C [RELAY-HEADLAMP] RELAY,HDLP OEM#89057700 ALL MAKES

My 2007 RAV4 Limited DRLs are the regular hi beams running at what looks like 1/2 voltage (6V?). I've installed an HID system for the lo beams and would like to do the same for the hi beams but don't see how would work with the stock DRL system.