Question about 2006 Buick Lucerne

Open Question

What is the torque spec for the tie rod end of a 2006 Buick Lucerne?

Posted by Anonymous on

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What is torque spec for 2006 Buick Lucerne front bub bearing?

2006 Buick Lucerne

The Hub Bearing Torque - Front

If Torque Specs are not in the box we recommend you torque to this setting. Axle Nut: 118 Ft/Lbs.Wheel Studs: 100 Ft/Lbs. WARNING: Failure to observe the following warnings could create a risk of ***** or serious injury.Proper maintenance and handling practices are critical.Always follow installation instructions and maintain proper lubrication.Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no liability is accepted for errors,omissions or for any other reason.This information is not intended to substitute for the specific recommendations of your vehicle manufacturer.Always use the recommended torque requirement unless otherwise specified in the carton.Depending on the application, type of hub unit bearing and location, the installation process may vary.Please review the vehicle manufacturer's recommendation before removing or installing components.
0helpful
1answer

Looking for front suspension torque specs for tie rod. Or is a stabilizer shaft link the same thing as a tie rod

The tie rod connects the two front steering pieces together so that both tires point in the same direction at the same time.
The stabilizer shaft link is part of the suspension that helps keep the vehicle lever when you're going around corners.
Check with your local GM dealer or auto parts supply for torque specs.
0helpful
1answer

What is the torque specs for a tie rod end on a 1994 toyota camry

The tie rod end adjusting nut, 54 ft lb or 74 Nm
The tie rod end ball joint nut, 36 ft lb or 49 Nm
0helpful
1answer

Torque specs tie rod end dodge ram

Does this include the outer tie rod nut also to be 45lbs foot torque?
0helpful
1answer

Replace valve cover gasket 06 buick lucerne

clear everything from the cover...remove all bolts on cover...replace with oem or gasket sealer. look up torque specs

not hard just a hassle to move everything!
0helpful
1answer

GMC 2500HD tie rod end nut torque specs.

Here are the tie rod end nut torque specs:
• Lower Control Arms - (Front and Rear bolt) 129 ft-lbs x2 and (Knuckle Stud) 37 ft-lbs
• Upper Control Arms - (Front and Rear bolt) 140 ft-lbs x2 and (Knuckle Stud) 37 ft-lbs
• Inner Tie Rods - 81 ft-lbs
• Outer Tie Rods - (Knuckle Stud) Tie Rod nut 44 ft-lbs and jam nut 55 ft-lbs
• Stabilizer Links - 17 ft-lbs
• Rear Shocks - Lower and Upper 85 ft-lbs
• Front Shocks - Module Bolt x2 37 ft-lbs, Module nut x3 37 ft-lbs and Stud nut 37 ft-lbs
2helpful
1answer

2006 grand caravan sxt 3.8 liter outer tie rod torque specs needed please.

Hello billmarks: My name is Roger and I will help you. The torque specs for the tie rod lock nut and the tie rod spindle nut is 55 foot pounds. Should you need further help please just ask.Please rate the answer. Thank You for using Fix Ya. Roger
1helpful
1answer

I need to change out the camber bolts. and i cant find the torque specs. can you help

CAMBER BOLT ON THE TIE ROD ENDS.YOU NEED A HAYNES REPAIR MANUAL TO GET THE TORQUE SPECS.YOU PROBABLY NEED WHEEL ALIGNMENT WHENEVER YOU REMOVE TIE ROD ENDS OR UPPER AND LOWER BALL JOINTS IT WILL ALTER WHEEL ALIGNMENT.
4helpful
1answer

Torque specs. for outer tie rod ends for 2006 dodge ram 1500 quad cab 4x4, 5.7 hemi

Tie rod end is 35 ft. lbs. Pinch bolt for the lower ball joint - 105 .I hope this helps you
3helpful
1answer

Need torque spec for 2000 Cirrus outer tie rod ends

45 Ft-lbs Tie-rod balljoint stud-to-steering knuckle nut, and 55 Ft-lbs Tie-rod (outer)- to- inner jam lock nut
Not finding what you are looking for?
2006 Buick Lucerne Logo

Related Topics:

39 views

Ask a Question

Usually answered in minutes!

Top Buick Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6963 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8991 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15008 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...