- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Front right lower side is the crank sensor ,in line with the crankshaft ,could be this playing up although i have had many problems with this type of engine ,one problem is the computer bolted to the engine ,seem to suffer heat fatigue ,another problem i cannot explain is it just will not start and for this i fit a crank sensor from the earlier version with the toothed front pulley and support then cut the wires from the crank sensor and run them to the one at the front of the engine but they are polarised on the wires so if it doesnt start reverse the wires to the crank sensor ,Now no doubt iam wrong as ever but i do think that the crank becomes magnatised and its affecting the sensor so by moving it to the front pulley it eliminates this problem .
No idea offhand to be honest i would need my head under the bonnet to know what wrong .could be anything from the gauze filter in the fuel tank on the bottom of the fuel pump becoming chocked up and leaving the car allows it to drop away to a faulty pump overheating or the contacts ,maybe even a ignition module overheating ,Best advice is ask a local mechanic to have a look for you as normally these early opel corsas with the 4 cylinder engine are bullet proof they are even valve free if the timing belt snaps .
×