Hi, MY SANDERO RENAULT 2010 I PUT IN LED HEADLIGHTS. THEY SWITCH ON BUT ON MY CLUSTER IT SHOWS BRIGHT AND DEAM AT THE SAME TIME.

I would think its a flasher relay or switch problem, do the indicators work when used via the stalk switch ? if they do then I'd start with the hazard switch

Hi. Thanks for your question. For assistance on Renault sandero you can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!

Best Manuals
Try out this link to get a solution

Ask girl in the bottom to answer

In all probability you put the bulbs in reverse polarity blowing park light fuse.. this will also stop the dash operating correctly

Check the owner's manual, if it is not listed it is likely not equipped. American cars do not use headlight replays on any make.

The filter is an integrated part of the fuel pump assembly.

The filter is an integrated part of the fuel pump assembly.

Hi guys, on a 2014 Renault sandero 1.0T when got an issue tonight with trying to fit LED park lights(which didn't work) and after all this. The one standard park light is a disaster because only works when it wants to now and the the other issue is that the cluster doesn't light up anymore. I might think a fuse popped but Any ideas?
Thanks in advance

use a rubbing compound or a buffing compound on the lenses, you will be amazed at the difference, then give them a clear coat

I would check for a possible defective multi-function switch. (Turn signal switch)