At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
That vehicle does not have a SJB - smart junction box . Has Generic Electronic (GEM)/Central Timer (CTM) CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
Depower the supplemental restraint system (SRS). For additional information, refer to Section 501-20B . Remove the audio unit. For additional information, refer to Section 415-01 . Remove the center instrument panel finish panel. Remove the screws. Remove the center instrument panel finish panel. Disconnect the electrical connectors. Remove the GEM/CTM. Remove the screw. Disconnect the four connectors from the GEM/CTM. Remove the GEM/CTM.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.That vehicle does not have a SJB - smart junction box . Has Generic Electronic (GEM)/Central Timer (CTM)
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
Depower the supplemental restraint system (SRS). For additional information, refer to Section 501-20B .
Remove the audio unit. For additional information, refer to Section 415-01 .
Remove the center instrument panel finish panel.
Remove the screws.
Remove the center instrument panel finish panel.
Disconnect the electrical connectors.
Remove the GEM/CTM.
Remove the screw.
Disconnect the four connectors from the GEM/CTM.
Remove the GEM/CTM.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Question edited for clarity.
Question moved to model category.
The BCM is located behind the glove box. Open Glove box, empty contents, grab sides of box and push inward a little bit and continue to open door. Once that's done there are 2 modules back there, #1 is ECM #2 is BCM, The BCM has a yellow clip on it.
Question edited for clarity.
Question moved to model category.
The BCM is located behind the glove box. Open Glove box, empty contents, grab sides of box and push inward a little bit and continue to open door. Once that's done there are 2 modules back there, #1 is ECM #2 is BCM, The BCM has a yellow clip on it.
The BCM is located on the back side of the Junction Block (fuse panel located to the left of the steering wheel). To get to it you'll need to remove the Junction Block and then unscrew the BCM from the back of it.
Oct. 13, 2006
It is located on the back side of the underdash fuse box (junction block). You remove the lower steering column cover and knee blocker reinforcement. Then remove two plugs from the bottom of the bcm.
Remove the bolts holding the junction block to dash panel mounting bracket. Remove the junction block from the bracket. Remove screws holding the bcm to the jb. Slide the bcm downward to disengage guide studs on jb from channels on bcm mounting bracket
Remove bcm from jb.
DOOR/LOCK fuse 15amp. Location the BCM
Body Control Module (BCM)
Under the right side of the center console, near the I/P
Fuse box is incorporated into the BCM . #2 is the BCM . Let me know if it's not the fuse , have diagnostic trouble flow chart
The BCM is located behind the glove box.Open Glove box, empty contents, grab sides of box and push inward a little bit and continue to open door. Once that's done there are 2 modules back there, #1 is ECM #2 is BCM, The BCM has a yellow clip on it
The BCM should be located underneath the center console towards the front underneath the dashboard! You can also check with Advance, O'Reilly or Autozone salesperson and they should be able to print you up a diagram for your year and model to use as a reference. I hope this helps you!
That vehicle does not have a SJB - smart junction box . Has Generic Electronic (GEM)/Central Timer (CTM)
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
Depower the supplemental restraint system (SRS). For additional information, refer to Section 501-20B .
Remove the audio unit. For additional information, refer to Section 415-01 .
Remove the center instrument panel finish panel.
Remove the screws.
Remove the center instrument panel finish panel.
Disconnect the electrical connectors.
Remove the GEM/CTM.
Remove the screw.
Disconnect the four connectors from the GEM/CTM.
Remove the GEM/CTM.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
or a BCM
×