Question about Hyundai Cars & Trucks

1 Answer

Can plastic clips (snapped off) be reattached to plastic front bumper on 2009 hyundai santafe andwould they be welded or glued using what glue?

Posted by M Willis on

Ad

1 Answer

ManiaLiga

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Website for playing football

https://daftarmanialiga.co/

Posted on Apr 08, 2021

Ad

5 Related Answers

Anonymous

  • 140 Answers

SOURCE: need to replace the front bumper cover on a 1995 ford escort

its just the bumper cover.. once you buy the bumper cover it will replace your broke one,, however you my need to buy a bumpercover support..i think its only about $30 more..good luck keith...

Posted on Mar 15, 2009

Ad

Anonymous

  • 51 Answers

SOURCE: 2001 hyundai santafe very wobbly wheel

If you've hit a pot hole hard then the wheel could simply be buckled. Remove the wheel and place it flat on the ground if it wobbles on the ground problem solved: buckled wheel!

Posted on Apr 29, 2009

Anonymous

  • 240 Answers

SOURCE: how do I reattach the front bumper? the left side

remove plastic rivets and bolts holding bumper within fender well, between lights near hood latch, and bottom of bumber, be careful taking bumper off to prevent cracking. exact opposite for installing bumper

Posted on Jun 17, 2009

Anonymous

  • 47 Answers

SOURCE: rear glass hatch latch bracket came off glass

not sure of the set up on your jeep off the top of my head, but uruthane glass adhesive is the only thing that is good on glass......its what holds in all the glass on your vehical

Posted on Jun 29, 2009

johnjohn2

Johnny Brown

  • 5763 Answers

SOURCE: one side of front bumper cover is hanging down on my 98 handa

You should remove the bumper cover and take a look and make sure that the cover is not broken, its all plastic and the hold down arms sometimes break off and bumper will hang, also look for missing or loose fastners,

Posted on May 28, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is alarm hood switch 2009 hyundai santafe limited


You just go to the link I attached I'm sure you will get the solution of your problem -

2007 2009 HYUNDAI SANTA FE REPAIR MANUAL

Sep 17, 2018 | Hyundai Santa Fe Cars & Trucks

1 Answer

I have a hyundia accent 2015 and the the front bumper was starting to come off so I put gorilla glue on it. It held it for awhile but now it’s coming apart. How do I remove the gorilla glue and what is the...


have the bumper mounting points re welded or simply get another one from the wreckers
go on line to the glue manufacturer and find the product that is used to remove the glue

Aug 10, 2018 | Cars & Trucks

1 Answer

Nissan versa plastic door handle lock cover popped off


Look for clips, screws, brackets,etc,and try get all in place, the covers can fit in a specific way.
Apply some glue to hold it in place, providing that the cover fits perfectly, if needed to visit the mechanic or bodyshop.

Jan 24, 2014 | 2009 Nissan Versa Hatchback

1 Answer

Bought window regulator for 2000 Olds Alero but plastic clip that is attached to bracket and glues to window is broken . So can't connect regulator to clip . Can clip be replaced ? How can old clip that's...


Replacement clips are available through specialty auto parts stores...there are many tricks or solvents that will loosen the glue on the broken clip...if you damage the glass, you can find a popular window replacement, inspect the clip too, at your nearby salvage yard or online...Hope this helps.

Nov 06, 2013 | 2000 Oldsmobile Alero

1 Answer

Changing a parking light bulb in front head light assembly


Remove the front wheel liner from the strut to the front bumper, all light assembly light bulbs will then be accessible. There may be screws however the majority is a plastic clip where you pull the center out then the clip easily removes.

Sep 08, 2013 | 2009 Buick Enclave

2 Answers

How can I replace the left front fog light unit from a toyota prius from 2009. I cann't find a maintenance manual for this model and year.


Its all attached by clips and screws.Nothing much special.But its all about the procedure.Dont forget the mark the position , location of the screws you remove, so while refitting you don't face any problemTo replace fog light bulb or to replace replace complete fog light unit, click this link below:--- http://technoanswers.blogspot.com/2011/07/how-to-replace-left-front-fog-light.html ---------- This will help.Thanks.Helpmech.

Jul 09, 2011 | Toyota Prius Cars & Trucks

1 Answer

How to remove headlamp assambly in a volvo s60 2002


Hello,

This should be fairly simple,one may have to remove the grille.

  • Remove trimmings on the front bumper cover to allow access to the bolt for removal of the front bumper. The trimming can be removed simply by prying the trimming from the center of the bumper cover using a Philips screw driver.
  • After removing the 2 bolts on the bumper cover, you may open the hood and remove the plastic fasteners on the top of the bumper.
  • To remove the plastic fastener, simply depress the center until click. Do not press too far or the fastener will be damaged.
  • Turn the Torx screw in the wheel well counter clockwise to loosen the catch plate on the bumper. Lift the bumper cover over the catch plate and push the bumper cover forward. This completes the removal of the front bumper cover.
  • To remove the headlight assembly, you will need to loosen the bolt on the retainer near the wheel well. You will then remove the 4 bolts that hold the headlight assembly.
  • There is one bolt on the side of the headlight assembly. Two bolts on top and one at the corner of the lens. They all have the same size bolt.
  • In order to remove the headlight assembly, after removing the bolts, the headlight harness needs to be removed.
  • The next step is to remove the trimming on the lens and removing the clips that hold the lens in place. There are 4 clips. One clips on each side.
  • Once the clips are removed, the lens can be pry open with screw driver. You may want to heat the edge to soften the glue or use an utility knife to scrape the edge. Be extra careful, as the glass can be very sharp if shattered. Please also wear protective gear such as safety goggle and gloves. After this, just reverse the steps to put the headlight back together.
Take care and good luck

Nov 06, 2010 | 2002 Volvo S60

2 Answers

The fabric trim on the front door of my 1994 Toyota Camry is coming away from the door. How do I refasten it to the door. It does not appear to be glued. Thanks


My experience with fabric in cars is it glued onto something if it not sewed. They make a spray on glue made specifically for auto fabric repairs. You spray it behind the fabric, press down the fabric, hold it for a few seconds (as directed) leave it alone overnight and that's it! Good luck!

Mar 15, 2010 | 1994 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14868 Answers

Brad Brown

Level 3 Expert

18626 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...