What is the spark plug gap on a 2010 Hyundai Sonata 4 cylinder engine?

see if this link helps you out.
sensor camshaft position of hyundai sonata gls 2010 2 4 4 cylinders Google...

Try the standard for a 6 cylinder. 153624. That's what I always use.

I'd take a spark plug out...connect its plug wire to it...lay the plug on something metal and crank engine while watching spark gap and see if you have a nice spark.
Thats the easiest test...

Hope this helps...

remove the plastic cover that bolts to the top of the valve cover. The plugs will be under there.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

For the 1997 Hyundai Sonata 2.0L DOHC In-Line 4-Cylinder:

Firing Order:
1 - 3 - 4 - 2
Cylinders:
..........(back)..........
|...4....3....2....1...|
.........(front)
Coil Connections:
(back)
|..1..|
|..4..|
|..3..|
|..2..|
(front)

Let me know if this helped and THANKS for using FixYa.com!

You didn't specify whether you have the (4) cylinder or the (6) cylinder engine..... I have a 2004 Hyundai Sonata 2.4L 4 cylinder and I just changed the spark plugs in it. I believe that the 2005 2.4L engine is the same. To locate and change the (4) spark plugs on a 2004 Hyundai 2.4L 4 cylinder engine: Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way. Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed. Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right. Starting with the fist spark plug on the left: Remove the spark plug cable by pulling straight up on the insulated connector. Using a spark plug socket, remove the old spark plug and install a new one in it's place. To access the second spark plug from the left, remove the electrical connector and the spark plug cable wire from coil number (1) and then remove the (2) 12mm bolts that secure the coil to the engine. Spark plug number (2) is located directly under the coil. Lift the coil straight up removing the insulated connector from spark plug number (2). Using a spark plug socket, remove old spark and install a new one in it's place. Repeat same procedures for spark plugs number (3) and (4). Note: If you have the (6) cylinder engine, the front (3) sparks pluge are readilly accessible but in order to access the (3) rear spark plugs, you will have to remove the intake manifold

You are correct. The plugs are accessed below these coils. Disconnect the coil connectors and remove the 4 10mm bolts which hold the coils in place -- then you'll have access to the plugs. Here's a pic

By the way, how many miles on this 2007 Sonata? You know the powertrain is under warranty (1st owner 100,000 miles). If you're having problems, have Hyundai dealership diagnose it and fix it under warranty.

They are directly below the coil packs (10mm bolts).

To locate and change the (4) spark plugs on a 2004 Hyundai 2.4L 4 cylinder engine:
Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way.
Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed.
Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right.
Starting with the fist spark plug on the left: Remove the spark plug cable by pulling straight up on the insulated connector. Using a spark plug socket, remove the old spark plug and install a new one in it's place.
To access the second spark plug from the left, remove the electrical connector and the spark plug cable wire from coil number (1) and then remove the (2) 12mm bolts that secure the coil to the engine. Spark plug number (2) is located directly under the coil. Lift the coil straight up removing the insulated connector from spark plug number (2). Using a spark plug socket, remove old spark and install a new one in it's place.
Repeat same procedures for spark plugs number (3) and (4).
Note: If you have the (6) cylinder engine, the front (3) sparks pluge are readilly accessible but in order to access the (3) rear spark plugs, you will have to remove the intake manifold.


please rate!