Question about Chevrolet Venture

1 Answer

I have a 2005 Chevy Venture LT. I needed to replace the power and heated passenger door mirror due to an accident. When the new one arrived, the wiring harness was different as well as the wire colors. I cannot find a harness to connect the new mirror or a diagram telling me what wires do what. I’m thinking the best solution is to cut off both harnesses and wire the new mirror directly, but need some guidance. The first photo is of the original harness.

Posted by Dan Radjeski on

Ad

1 Answer

Simon Atkinson

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,974 Answers

Before you start cutting wires it is worth you contacting the company who supplied the mirror unit and get them to recheck the one they sent you. 2005 was the last year they made the Venture BUT the LT trim level ended in 2004. They might have sent you the mirror for a vehicle that isn't for the LT trim.

Posted on Jan 25, 2021

  • Dan Radjeski Jan 28, 2021

    Thanks for the tip. I have contacted them to see if we can come up with a solution.

  • Simon Atkinson
    Simon Atkinson Jan 29, 2021

    Glad I helped.

×

Ad

5 Related Answers

inf12

Harry Daehling

  • 13 Answers

SOURCE: need wiring diagram for taillights on 2000 chevy venture van

d7d3cd6.jpg3a50d5e.jpg80738de.jpg8d3e722.jpg GOOD LUCK

Posted on Feb 08, 2009

Ad
emissionwiz

Marvin

  • 85239 Answers

SOURCE: audio wiring problem

Radio Constant 12V+ Wire: White/Green
Radio Switched 12V+ Wire: White/Red
Radio Ground Wire: Black
Radio Illumination Wire: n/a
Radio Dimmer Wire: Red/Black
Radio Antenna Trigger Wire: n/a
Radio Antenna Location: Rear Glass
Front Speakers Size and Location: 6 1/2′ Doors
Left Front Speaker Wire (+): Blue/Green
Left Front Speaker Wire (-): Gray/Black
Right Front Speaker Wire (+): Red/Green
Right Front Speaker Wire (-): Brown/Black
Rear Speakers Size and Location: 6′ x 9′ Rear Deck
Left Rear Speaker Wire (+): Blue/Yellow
Left Rear Speaker Wire (-): Gray/White
Right Rear Speaker Wire (+): Red/Yellow

Posted on Apr 06, 2009

Anonymous

  • 490 Answers

SOURCE: How do i wire the new drivers side power window

Hi you have a unique suitation.Go to a junk yard a you pull it/or they go get for you.get the switch and the harness. ask them to leave as much of the harness as possible.trim and cut both sets of wires.yours and the harness you just picked up match the colors and your done,you can use **** connectors or small bug nut connectors.soldering is best if your GOOD at it,if not use the wire connectors.

Posted on Aug 05, 2009

Anonymous

  • 171 Answers

SOURCE: need a wiring diagram for a 99 hyundai accent tape deck

1999 Hyundai Accent Car Stereo Radio Wiring Diagram Car Radio Constant 12V+ Wire: Red/Yellow Car Radio Ignition Switched 12V+ Wire: Blue/White Car Radio Ground Wire: Black Car Stereo Illumination Wire: N/A Car Stereo Dimmer Wire: N/A Car Stereo Antenna Trigger Wire: N/A Car Stereo Amplifier Trigger Wire: N/A Front Speakers Size: 5 1/4′ Front Speakers Location: Doors Left Front Speaker Wire (+): White/Red Left Front Speaker Wire (-): Black/Red Right Front Speaker Wire (+): White/Blue Right Front Speaker Wire (-): Black/Blue Rear Speakers Size: 6 1/2′ Rear Speakers Location: Rear Deck Left Rear Speaker Wire (+): White/Red Left Rear Speaker Wire (-): Black/Red Right Rear Speaker Wire (+): White/Blue Right Rear Speaker Wire (-): Black/Blue

Posted on Jan 02, 2010

jonmothman

Jon Taylor

  • 1 Answer

SOURCE: 1996 chevy 1500

1996 Chevrolet Silverado C1500 Car Stereo Wiring Guide

Car Radio Battery Constant 12v+ Wire: Orange
Car Radio Accessory Switched 12v+ Wire: Yellow
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Gray
Car Stereo Dimmer Wire: Brown
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue

Posted on Aug 06, 2012

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuse panel diagram


All of the interior lamps are powered thru the body computer. The power source is a 10amp fuse marked CTSY LAMP. The vanity mirror is on the same circuit with the lights for the door lock and power window switches.

Jun 28, 2013 | 1999 Chevrolet Venture

1 Answer

Im trying to replace the passenger mirror, need to


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Once the panel is off, you will see two or three bolts securing the mirror assembly onto the door

Sep 21, 2009 | 2003 Chevrolet Venture Passanger

1 Answer

What is the procedure for replacing the passenger door mirror on a 2008 Nissan Sentra?


I haven't done this on a Sentra, but I have done it on a Toyota and a Mazda and they were both the same.

I took the black plastic cover off the back of the mirror (this will be on the inside of the passenger door).

There whould be between 2 or 3 screws that you will unscrew. If it is a power mirror there will also be a little connector. Undo the connector and remove the old mirror.

Attach the new mirror and plug in connector if power mirror. Replace the screws and re attach the black cove to the inside of the door.

Hope that helps!

Jul 08, 2009 | 2005 Nissan Sentra

1 Answer

Replace passenger side mirror, power


Open the door. Look for a cheap piece of plastic near where the mirror is located. Carefully pry the plastic off. There are 3 bolts. There is a wire harness connector. Unbolt the mirror and unclip the harness. Installation is reverse of removal. Easy job.

Jun 10, 2009 | 2005 GMC Canyon

1 Answer

Need to replace the broken outside right passenger mirror I have replacement


To repace the COMPLETE MIRROR UNIT, the inside door trim must be removed. Hope this helps

Apr 29, 2009 | Chevrolet Suburban 1500 Cars & Trucks

2 Answers

Passenger side mirror


If you need to replace the entire mirror - it's a little involved. First you need to take the upper extension panel off from behind the mirror (black triangle) - just pull it of starting at the top. It will snap back on later. Next - remove the different screws holding the door panel in place (not the ones behind the mirror yet!) One is under the handle (pull it out and pull out the filler panel - small plastic thing that has a hole to pry it out). Then take off the rear red light - also pops off - and remove that screw. Finally - pick up the rubber filler where your fingers pull the door shut and remove these torx bolts.

Now is the tricky part. Snapp off the entire interior panel. It will pop off - but very difficult. It will sound like it is breaking! Start at the outer bottom corner - and use a door panel remover tool - check Amazon or E-bay - to keep from breaking things. Pull it out from all around the bottom and sides and then lift it up over the door lock. It good to have a friend help here. The panel will still be held on by a cable - that is your door release - leave it alone and let the panel hang by it (or better, put a box under it to rest on).

Now...remove the three bolts holding the mirror on - have a friend help hold the mirror while you do this or it will scratch your new car! Since the inner panel is off - you can also disonnect the mirror plus and remove it. It sounds silly - but the only reason to remove the door panel is to unplug it!

Get you new mirror and reverse the steps.

If you are just replacing the glass (non-heated) - get a replacement from the dealer. Adjust the mirror all the way to the inside and reach behind and pop it off. CAREFUL - put tape over the entire glass as it will likely break even more! Remove your connectors if heated - and replace (and reconnect) with your new glass. It just pops back on!

Replacing glass is easy - just be careful of cheap imitations on e-abay). And never use cheap flat glass on the passenger side! The DOT has special requirements for mirror glass - buy it from gmpartsdirect.com or your local dealer.

kb

Oct 30, 2008 | 2008 Chevrolet Impala

1 Answer

Installing a Nissan Sentra Passenger Side Manual Non Folding Mirror.


had to install a driver side non folding mirror, fairly simply to say the least. There's a cover on the interior of the door, near the window, remove the cover, remove the 3 screws, need i believe a 10mm socket. If a power window, unhook the circuit. Replace new mirror.

Jul 28, 2008 | 2005 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23590 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...