Question about Ford F-250
Have you checked the fuse? In most cases the brake light fuse has blown.
Posted on Jan 30, 2021
abs light on as well? even tho you changed the speed sensor did you clean the contacts really well? i had the same problem i replaced the sensor and nothing.... then found out the contacts were corroded took the sensor back off and cleaned the contacts. works like a charm! try that and let us know if that helps.
Posted on Sep 24, 2008
Check for a broken wire or loose connection at the multifunction switch. This can occur especially often if you use tilt steering. there is a few screws under the steering column shroud, unscrew the tilt wheel knob, you may vice grips to get it to unscrew. remove the shroud and check wiring and connections, remove the multifunction switch and make sure there are no wires loose in the connectors. If you have a wiring diagram you can jump the circuits at the connector, if no loose anything and you get lights to go on by jumping the switch, replace the multifunction switch (that's the lever on the left of the steering wheel, in case you were wondering)
Posted on Aug 04, 2009
Tips for a great answer:
Dec 09, 2013 | 2003 Ford F250 Super Duty Crew Cab
Feb 08, 2012 | 2001 Ford F250 Super Duty Super Cab
Dec 14, 2017 | 2001 Ford F250 Super Duty Super Cab
Jan 15, 2011 | 2001 Ford F250 Super Duty Super Cab
Apr 29, 2010 | 2001 Ford F250 Super Duty Super Cab
Apr 29, 2010 | 2002 Ford F250 Super Duty SuperCab
Jan 15, 2010 | 1995 Ford F250
Dec 07, 2009 | 2003 Ford F250 Super Duty Crew Cab
15 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: