Ssangyong Tivoli. Which is the fuse for the washer bottle?

Question edited for clarity and spelling of maker.
Question moved from MISC to one of the Rexton categories.

Fuse 22 covers Clock, Power Outlet, and OS Mirror.

The USB is a 5 volt power supply and will likely have an inline fuse but may be tagged with the Power Outlet.

https://www.manualslib.com/manual/652910/Ssangyong-Rexton.html?page=204

https://www.google.com/search?q=2007+ssangyong+rexton+clock+fuse

..

TRY GETTING IT REPLACED

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help
thanks

must try www.reliable-store.com

If you cannot get to it from inside the wheel well or from above or below the car you might have to remove the front bumper as a lot of vehicle makers use that area to avoid wasting space.

I dont know this particular vehicle but most washer bottles are behind the inner front wing lining, these are easy to remove as most are just screwed in place , obviously look at the side where the washer bottle filling point is

Do a quick jumper to the battery and see if it comes on. Just check all the fuses for continuity if you don't know which one. It should be in the manual chart as well.

Cigar lighter often shares a fuse with other items. Fuse locations and specs can change depending on territory and trim level and so the supplied vehicle handbook is the best reference source.

the motor is mounted in the window washer bottle
you need to remove the bottle to access the motor because its at the bottom of the bottle

Probably. It should be marked on the fuse panel. If the washers don't work and you cant hear the pump motor running, the pump motor may have seized. The motor will be at the bottom of the washer fluid bottle. I have no idea where the washer bottle is on an Infinity but if you find where you fill the washer bottle up, follow the tube or pipe to where It goes and you will find the pump motor underneath. The pump motors are usually just pressed in and held by small plastic clips.

the washer motor is gone then ,,,its in the bottle,,