SOURCE: ABS LIGHT AND TRACTION CONTROL LIGHT ON DASH
make sure u didnt break a wire, there are sensors on the brakes, make sure theyre plugged in
SOURCE: brake light abs light traction control light all
you'll have to have it diagnosed at a repair shop to pinpoint the source. sorry, but thats how they make them. you could buy your own but it'll cost about 200$
SOURCE: ABS light and Traction control light stay on.
That "grindy" feeling is when the ABS kicks in. It's only suppose to activate when you slam on the brakes and the wheels would normally lock. Instead, ABS will very quickly pump the brakes on and off, to prevent the wheels from locking (making a giant skid mark) and stopping the car more effectively. Generally this only happens if you slam on the brakes or loose traction due to rain or snow while braking. If this is happening often and the brake light is on, on the dash, then you need to get this checked out by a qualified mechanic ASAP.
SOURCE: Engine light and ABS traction control light remain
The ABS sensor is a speed sensor also for Traction Control. This is why both lights are on , One of your front ABS sensors are bad or disconnected, or has a pinched wire.
SOURCE: traction control light and abs light
Something happened to me today... I was driving my car and my trac control and abs were on.... I put my car in reverse and got out of a parking... And the traction control and abs went off... What could that be?
26 views
Usually answered in minutes!
×