Question about Ford Cars & Trucks

1 Answer

2013 f250 Super Duty. Where is inertia switch?

Posted by Sue Milam on

  • Sue Milam
    Sue Milam Dec 01, 2020

    I might have misunderstood my hubby. This truck may very well have an inertia switch but that didnt end up being the problem in our case

×

Ad

1 Answer

Jeff Armer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,239 Answers

Gas or diesel What engine ? If it has one there are normally located behind or incorporated into the right hand kick panel , passanger foot well

Posted on Nov 30, 2020

Ad

5 Related Answers

mrgreenz

Daniel Arellano

  • 962 Answers

SOURCE: Fuel collision inertia switch

on the right cowel panel just forward of the door under the glove box.

Posted on Dec 06, 2008

Ad

Anonymous

  • 1305 Answers

SOURCE: I need to find the fuse that feeds

I'll do you one BETTER! Click here and you can download a free copy of the complete owners' manual from the Ford Fleet website... very cool. The fuses are located in the engine compartment fuse box and there should be separate fuses for different lights on the trrailer plug.. one for the left turn, one for running lights etc.. check them all.

Posted on Nov 20, 2009

philgoodno1

  • 41 Answers

SOURCE: 1999 ford f250 super duty 4x4 will go into 4

transfer case selector switch or equivlent to is bad or connectors to the switch is bad dose it do only when it rain or moisture underneath.

Posted on Jan 19, 2010

Charles Richard

  • 22 Answers

SOURCE: Ford f250 super duty V10 cruise control doesn't work.

WOULD CHECK BRAKE SWITCH FIRST AS THESE HAVE A HIGH FAILURE RATE.

Posted on Dec 02, 2011

grz_gralf

Marco

  • 80 Answers

SOURCE: fuse box diagram

For Ford's fuse diagrams and schemes you may want to check Ford diagrams schemes imgVEHICLE com

Posted on Sep 26, 2018

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is mirror wiring for plugins?


Installing 08 mirrors on 01 Superduty, looking for wiring diagrams ...

www.ford-trucks.com > ... > Super Duty & Heavy Duty
Aug 12, 2008 - Installing 08 mirrors on 01 Superduty, looking for wiring diagrams Super Duty ... 2013-2014 mirror plug pin outs, SUPERDUTY_08, Super Duty ... Power/Heated/Lighted Tow Mirror upgrade...
Jul 24, 2012
F250 Paddle to towing mirror installation
Dec 20, 2010
Towing Mirror Wiring Harness Adaptor
Sep 15, 2010
Towing mirrors
Apr 16, 2010
More results from www.ford-trucks.com

Nov 19, 2015 | 2000 Ford F350 Super Duty Super Cab

1 Answer

2001 ford f250 super duty power mirrors don't work, power at fuse but not at switch


If power at fuse, must have power coming out of fuse. Check both sides of the fuse. If no power to switch that's all it could be if the plug is all the way on the switch and switch is good.

Oct 17, 2014 | 2001 Ford F250 Super Duty Super Cab

1 Answer

My 2001 f-250 had two spark plugs come out the eng i replaced them with helacoils no fuel so i changed the fuel pump still no fuel


Check your Inertia switch, should be located behind a kickpanel or behind glovebox. Vibrations could have triggered it. It is a good place to start looking because you can check power from fuelpump relay which connects through it to the fuelpump.

Reset Inertia sensor by pushing button on it to reconnect.power.

Please rate my info.

Dec 20, 2012 | 2001 Ford F250 Super Duty Super Cab

1 Answer

I need a diagram of the fuse and relay panel, so i can pull the relay for my fuel pump to change my fuel filter. i have a used 2001 for f250 with the 5.4 liter v8 and it did not have the owners manual when...


The Fuel pump relay for this vehicle is not removable, not smart on Ford's part. What I used to do is disconnect the fuel inertia switch which is located right next to the fuse panel on the passenger side lower kick panel, closest to the firewall. It's tough to get to but can be done. I've seen guys take the inertia switch to pop it then reset it when ready but I'd recommend just disconnecting the connector, and run the engine til it stalls, replace the filter then reinstall connector. The filter can be disconnected without disconnecting the switch by using the fuel clip tool and slowly pulling the line off, allowing pressure to drop but this should be done by an experienced person wearing safety glasses only.

Disconnecting the inertia switch and running the engine til stall could throw a diagnostic code/engine lamp but this can simply be erased by disconnecting the negative battery terminal for 5 minutes. Good luck, please ask if more help is needed.

Apr 17, 2011 | 2001 Ford F250 Super Duty Super Cab

1 Answer

Truck is equiped with a fuel shutoff switch it says to check manual, i did but is not listed where it says can u help me please ?


Hi, here is what I have. Indication is in the driver's side pillar.

The inertia switch is located behind the passenger side kick panel on the F-150, F-250, Expedition, Navigator and 1999-00 F-Super Duty models. On 1997-98 F-250HD, F-350 and F-Super Duty models, the switch is located behind the driver's side kick panel.


RESETTING THE SWITCH

jturcotte_392.jpg

Fig. Fig. 1 The inertia switch reset button is located on the top of the switch

Apr 02, 2011 | 1999 Ford Super Duty F 450

2 Answers

Wont start it appears to be the fuel pump how do i know for sure that it is the fuel pump and no something else


If you have a Gas engine there is a safety switch called an Inertia switch. You should be able to hear the Fuelpump prime the system for 1 or 2 seconds when the key is turned to Run position. If you do not hear the Fuelpump, the Inertia switch has a pushbutton on it for Reset. Just hold the button down for 2 seconds, then try to start the truck.

If you still do not hear the Fuelpump there is a Relay in one of the Black boxes under the hood. There is also a fuse under the dash. The Inertia switch can be behind a Kickpanel. Check your Operators Manual.

Jul 20, 2010 | 2002 Ford F250 Super Duty SuperCab

2 Answers

1999 ford f250 super duty 4x4 will go into 4


transfer case selector switch or equivlent to is bad or connectors to the switch is bad dose it do only when it rain or moisture underneath.

Jan 19, 2010 | 1999 Ford F250 Regular Cab

1 Answer

2002 f 250 door ajar light on wont go off


sounds like the switch located somwhere along the door jamb is stuck in the open position. find the switches at all the doors and shoot some wd-40 into the switch. depress the switches a few times. this should help, otherwise u may need to replace the bad switch.

Dec 15, 2009 | 2001 Ford F250 Super Duty Super Cab

1 Answer

Fuel collision inertia switch


on the right cowel panel just forward of the door under the glove box.

Dec 06, 2008 | 2000 Ford F250 Super Duty Crew Cabs

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Mike

Level 3 Expert

4372 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...