Question about Chrysler Cars & Trucks

1 Answer

2007 Chrysler 300 was sitting still and running all at once it just just off it sounds like its not getting gas what could it be

Posted by Dale Zimmerman on


1 Answer

old marine

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chrysler Master
  • 2,325 Answers

What does not getting gas sound like? If you suspect the fuel system, squirt some starting fluid into the intake tube. If the engine starts and runs briefly, you're probably not getting gas. Or gas is being delivered to the fuel rail but the injectors are not firing.
You really need to do systematic trouble shooting in this situation, not just guessing (again, what does not getting gas sound like?). To run, an engine needs air, fuel, spark, compression, and proper timing. Check each of these and you should find what's missing.
If you are not familiar with how to check each of these, invest in the services of a qualified professional.

Posted on Nov 27, 2020


3 Related Answers


  • 120 Answers

SOURCE: My 2002 Chrysler Town & Country wont start

go for a fuel injection cleaner and replace your spark plugs.

Posted on Dec 31, 2008


Josh Van Nostrand

  • 62 Answers

SOURCE: On the Chrysler 300, 06. The old pump and the new pump comes on for 2 to 5 sec then stops running. Engine sounds like its. Not getting any gas. Trying to locate the fuel release VAL under Hood.

The fuel pump normally only comes on for a second unless the car starts and is running, if the car starts and the pump only runs for a few seconds, then there is a problem with the engine signal to the ecm, ie its not telling the computer that it is running. I dont believe there is a schrader valve on those fuel lines, if there is, chrysler probably put it underneath the intake plenum. If the car will not start, but you hear the fuel pump kick on and off, it could have a clogged fuel filter, or injectors, or even bad connections going to the injectors. They normally are all switched via the ground wire for each injector, so if they are not cycling it could be a bad ecm, or bad connection somewhere in the wiring harness

Posted on Jul 10, 2016

deton8 von Splosion

  • 3340 Answers

SOURCE: 2007 chrysler 300 fusel pump relay numbe and where to find it 2.7 v6

Totally FREE circuit drawings & TSBs
(Technical Service Bulletins) are available from
BBB Industries (registration is required - ( these are
REAL manufacturer style drawings )).

Go to
BBB Industries Premium Alternators Starters Power Steering Products

This should get you started... Happy hunting!

Carnac the Magnificent

Posted on Jul 28, 2018

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What to do to fix my signal lights 2007 Chrysler 300

Well the basics first... check the FUSE.

Next see this YOUTUBE video... this is for a 2005 but it should be good enough for you to see a similar setup!

2005 Chrysler 300c Steering Wheel Column Play Turn Signal Switch Problem

I HAVE a OLD Chrysler 300 and it's been sitting in the driveway for about 15 years!


Apr 15, 2018 | Chrysler Cars & Trucks

1 Answer

Ac not working change radiator and fans one fan comes on when start car but ac isnt working 2007 Chrysler 300

ok do it have enough freon ?check to see if the ac compressor getting power if it is have it gas up

May 18, 2015 | Chrysler Cars & Trucks

1 Answer

Why does my 2007 Chrysler 300 start to **** when accelerating around 60 mph and when I take my foot off the gas pedal? No brake was applied.

you need to check you plugs and wires on the car also looking into changing your fuel filter may be a great idea , just a normal tune-up on the car would help this out dramatically

Sep 30, 2014 | 2007 Chrysler 300

1 Answer

My 2005 chrysler 300 wont start. Recently we have had flood rain falls my wife avoided the majority of puddles after stopping at a light the car cut off and hasn't started since. It's been sitting for a...

If you spray something into the intake & it runs,
then you obviously have no fuel pressure, so you
check that & the fuel pump

You not at a loss,your just doing nothing

Aug 21, 2014 | 2005 Chrysler 300

1 Answer

It takes 5 seconds for my crysler 300 to start after I turn the key

check fuel pressure it maybe returning to the tank after the car sits or if it runs bad for a little bit once the car starts it maybe a leaking injector

Jan 12, 2013 | 2008 Chrysler 300

1 Answer

2007 chrysler 300 car won't start OBD light on.

Sounds like an electrical issue. You'll want to take it in.

Nov 04, 2012 | 2006 Chrysler 300

1 Answer

2005 Chrslet 300 C hemi stalls after filling with gas

make sure your gas cap clicks a few times they have a baffle vent in them and cause a vapor lock next time it does it take your gas cap off youll hear a vaccum

Sep 10, 2009 | 2007 Chrysler 300c AWD Sedan New Cars

2 Answers


Are you sure it has a remote release for the fuel door? I think that might be optional on the Chrysler 300. Try pushing down on the fuel door and then release it to see if it pops open.

Jul 26, 2008 | 2007 Chrysler 300 AWD Sedan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers


Level 3 Expert

4372 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides