Question about Kia Cars & Trucks

1 Answer

Plastic sill cover removal on a 2008 kia sorento

Posted by John Marks on

  • Anonymous Nov 05, 2020

    kia Sorento here

×

Ad

1 Answer

Harry Wilson

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 81 Answers

Just push up on the plastic front side on your kia Sorento

Posted on Nov 05, 2020

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: Kia Sorento

http://www.kia-forums.com/kia-sorent...removal-2.html

Posted on Nov 18, 2008

Ad
jimmy nutron

jimmy nutron

  • 132 Answers

SOURCE: where are the spark plugs on a 2008 kia sorento

ok to find the spark plugs you will see 4 wires that are thick and usualy grey or black but can be colored sometimes. fallow thoes to the block of the engin you are going to have to pull them off the spark plugs the wires go from the distributor cap do not pull them off the cap how you know whare to pull the off at is the ones that are spaced apart and right on the engin pull them straight off and you will see the spark plug you will need a spark plug sockit to take them out

Posted on Jun 04, 2009

Anonymous

  • 295 Answers

SOURCE: remove seat belt cover

with a very small screw drive plastic pry tool would be best wedge it under the cover and gently pop it out.

Posted on Jul 08, 2009

Anonymous

  • 1 Answer

SOURCE: How do I remove the plastic engine cover on my

Just push up on the plastic front side. It is held in place by what I call "lock and pops" little metal spikes with ball on the end of them. The oil filter is at the back of the engine (center). Don't forget to use only synthetic 5-20W.

Posted on Jun 01, 2010

alicantecoli

Colin Stickland

  • 22485 Answers

SOURCE: How to Remove the Ignition Switch From a 2003 kia

do you have the key?? if so then its relativly easy without teh key you will have to cut the whole lot off

Posted on Jun 12, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is pressure regulator located on 2006 kia sorento


howdie ther is plastic cover over the engine take this off and then follow the fuel line to it and remove it And May Ask why you doin this Cause ther is no reason on Less you have over 340 km,s on the engine ok just sayin be lookin at the fuel pump pressure and fuel filter before doin this

Apr 09, 2015 | 2006 Kia Sorento

1 Answer

2008 Kia Sorento - Hazard lights don't work and left turn signal stays on when engine is off. Help!!!


Wild guess the hazard light switch or "flasher" relay is bad, which in turn affects the turn signal issue. For a temporary fix, remove the fuse for either or both devices, until you or your reliable mechanic can find a fix.

Mar 03, 2015 | 2008 Kia Sorento 3.3

1 Answer

How do i repalce the power window switch on the drivers side of a 2004 Kia Sorento


REMOVE DOOR PANEL USING SPECIAL TRIM REMOVAL TOOL. (PLASTIC CLIPS). PEEL BACK ICE & WATER PLASTIC COVERING IF NECESSARY. REMOVE ANY AND ALL SCREWS SECURING ANYTHING TO DOOR PANEL, IE: TRIM, HANDLES, ETC.WINDOW AND POWER LOCK SWITCH SHOULD NOW BE ACCESSIBLE. UNCLIP, AND/OR UNSCREW SWITCH. DETACH ELECTRICAL LEAD FROM SWITCH. INSTALL ALL COMPONENTS IN REVERSE ORDER

Jan 21, 2015 | 2004 Kia Sorento

1 Answer

How to replace ppcv vavle on 2008 kia sorento


eazy eazy look on valve cover for a hose that leads to the PCV valve you may have 2 most only have 1 ,remove from valve cover and remove old 1 from hose, replace with new one.

Sep 03, 2014 | Cars & Trucks

1 Answer

How do I replace heater hose in Kia Sorento 2006


remove wiper arms 14mm remove rubber strip & plastic covers then you can remove wiper motor assembly 10mm then unbolt steel panel 10mm now you can access hose ,

Jul 07, 2014 | 2006 Kia Sorento 3.5

1 Answer

Where are the spark plugs located in a 2003 Kia Sorento


you removed the engine cover. they are a long way below that ....on top of the engine cylinder heads are black plastic covers about 12 in by 3 inches ...the plugs are below them...you have to remove everyting that is in your way to get at them....go to www.kiatechinfo.com/default.asp and log in ..go to shop and then general....the right hand bank just has the plugs whilst the left hand has the 3 coils mounted on top of the other 3 plugs...there is no distrubutor the coils are double ended and fire two plugs at the same time

Dec 22, 2010 | 2003 Kia Sorento

1 Answer

I need instructions on how to remove a radiator from 2004 Kia Sorento.


On the radiator almost always carry a plastic cover and then has a metal piece that connects the fenders, Supeior disconnect the hose and lower radiator hoses or disconnect tubes that connect the transmission with radaiador, check if the radiator has screws hold it down but most have only the top 2 screws, remove the fan and take out the radiator with fans outside can change them. is the common procedure to change the radiador.Thanks and good luck

Jan 09, 2010 | 2004 Kia Sorento

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18520 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...