Https://www.fixya.com/cars/t12827529-location_crankshaft_position_sensor_2004
This is an fixya answer from a previous question that was asked.
SOURCE: Location of the crankshaft position sensor on a
At the front of the crankshaft. if its near time for the timing belt, you want to replace it along with any pullies, tensioner and water pump
SOURCE: 2005 Kia Sedona, Trouble Code P0320. Everything I
This is a common problem usually related to the crankshaft position sensor. Before you replace it, disconnect the electrical connector to the CPS sensor and clean it with electrical contact spray and add a dab of dielectrical grease. If the problem continues, replace the CPS sensor. It is easy to replace and is not very expensive. It just bolts to the engine block with one or two bolts. I believe the CPS sensor on the Sedona is behind the timing cover on the front of the engine.
SOURCE: My mechanic is having trouble locating the
hi,
i have attached the image, showing the position of crankshaft position sensor.hope its helpful for you. Please rate my solution as helpful.have a great day.
SOURCE: Crankshaft position sensor replacement on 2005 Kia Sedona
The CPS is located under the timming cover 4 small bolts remove the cover and the sensor is viewable 2 bolts have to be loosend and the wire leads up to a dual connector on the left side of the engine
SOURCE: how do i remove cd
you have to start from the console first and work your way up to the bezel. undo the screws from the cup holder and lift the console bezel out the you can get to the two side screws beside the radio/cd player, google it and you should find a pic of the dash taken apart
98 views
Usually answered in minutes!
×