You may have disconnected a vacuum line from the intake manifold or unplugged a sensor.
Hello... Maybe try another sensor...too many problems with non origin?l sensors...
SOURCE: the idle air control valve
if it is not running,and wont start,pull the idle air control and look at it,,is it stuck all the way out? if so this is ur problem
SOURCE: diagram for firing order for 1999 dodge ram 1500.
Regards,
Tony
SOURCE: dodge ram 1500 5.9 idles rough and stales out
This truck has problems with the cover inside intake leaking vacuum and causing rough idle and oil usage , its hard to say what your problem is with out testing, have you had the check engine light scanned for codes? what year is this dodge?these also had intake leak problems. try starting the engine and let it idle and then with some carburator cleaner spray around intake gasket and see if idle changes if it does then you have a intake gasket leak, another problem may be a leaking injector, try some sea foam in the gas tank and run a half tank of gas and see if that helps, otherwise a fuel injection system cleaning would be the way to go but this is only if its an injector problem, if this truck is 1996 or newwer have the computer scanned at an auto parts store for any codes. if there are codes let me know what they are even list the code and #. good day
Code 37 is torque converter clutch solenoid failure. Transmission wont shift in and out of overdrive.
214 views
Usually answered in minutes!
×