Question about Nissan Cars & Trucks

1 Answer

Nissan np300 hardbody main bearing and big end bearing bolts torque settings please

Posted by Rudi Hattingh on

Ad

1 Answer

ray gallant

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Nissan Master
  • 67,979 Answers

TRY ASKING YOUR LOCAL AUTO PARTS STORE OR BUY A SERVICE MANUAL FOR IT

Posted on May 23, 2020

Ad

5 Related Answers

michael_grey

Michael Grey

  • 365 Answers

SOURCE: engine bearing torque settings big end and main bearing

4 cylinder correct?
1bac25a.jpg

Posted on Jun 20, 2009

Ad

Anonymous

  • 167 Answers

SOURCE: WOULD YOU KNOW THE TORQUE SETTINGS FOR MAIN

Mains Stage 1 83nm
Mains Stage 2 167nm

Big ends Stage 1 29nm
Big ends Stage 2 45 - 60 degrees

Hope this helps

Posted on Jul 10, 2009

Stanley Kramer

  • 115 Answers

SOURCE: cylinder head torque settings for a toyota 1493cc

If you have a vehicle application for the motor you can get a Haynes or Chilton manual from your local auto parts store. They usual run around $30.

Posted on Sep 04, 2009

Anonymous

  • 382 Answers

SOURCE: hyundai elantra 1.6GLS J2 torque settings

dear friend:here follows the settings in need:
cylinder head-30-35 nm + 30-35 + 65deg + 65deg.
mains-30nm +65deg
big ends- 1 - 26nm 2 - 52NM
fly-wheel -130nm
cam-sprocket - 100-120
crank-pulley - 170-180
cam caps -15nm

Posted on Sep 23, 2009

Anonymous

  • 91 Answers

SOURCE: need torque settings for big end and main bearing

big end - stage one 18-22 Nm. stage 2 40-50 degrees
main bearings stage 1 20 Nm stage 2 90 degrees

Posted on Dec 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's the torque settings for the Opel corsa1.4i crank mains and big ends


Please note: You must use new bolts as these are torque to yield bolts, in other words they are a type of linear spring.
Connecting rods/big-end bearing cap bolts (use new bolts)
stage 1 ... 25 Nm (18 lb ft)
stage 2 ... angle tighten + 30 degrees
Main bearing cap bolts (use new bolts)
stage 1 ... 50 Nm (37 lb ft)
stage 2 ... angle tighten + 45 degrees
stage 3 ... angle tighten + 15 degrees

Nov 22, 2016 | Opel Corsa Cars & Trucks

1 Answer

Torque settings on a yaris 1.3 16v big ends,mains,flywheel,cylinderhead


Toyota Yaris Main and Big end Torque settings:
Tighten the main and big end bolts in sequential order and in two steps.
Main bearings. Stage 1.
22 ft lbs.
Stage 2.
44 ft lbs

Big end bearings.
Stage 1.
11 ft lbs.
Then Rotate bolt head a further by 90 degrees

Head bolt torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:
9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10

Flywheel spec:
65 ft lbs

Jul 15, 2016 | 2007 Toyota Yaris

1 Answer

What is the torque setting for main bearing and big end bearing of a Toyota Yaris 1.0 1kr 3 cylinder?


Toyota Yaris Main and Big end Torques:
Tighten the main and big end bolts in sequential order and in steps two steps.
- Main bearings. Stage 1. 30 Nm.
Stage 2. 59 Nm.
- Big end bearings. Stage 1. 15 Nm.
Rotate further by 90 degrees.

Apr 09, 2015 | 2008 Toyota Yaris

1 Answer

Torque settings opel astra 95 1.6 big end and main bearings


Opel astra 160ie 93 model, what's the big end torgue specs on bolts

Apr 05, 2014 | 1994 Opel Astra

1 Answer

Torque settings for Nissan na 20 cylinder head


I need the torgue settings for Nissan Hardbody NA20 engine
: Mains bearings, Big ends and flywheel as well as timing belt settings

Feb 11, 2013 | Cars & Trucks

1 Answer

2002 audi tt 225 bhp cranksharft torque settings


Crankshaft torque settings for 2002 Audi TT 225 BHP:

1. Main bearings: Renew bolts = Yes
2. Main bearings: Stage 1 = 65 Nm
3. Main bearings: Stage 2 = 90 degrees
4. Big end bearings: Renew bolts / nuts = Yes
5. Big end bearings: Stage 1 = 30 Nm
6. Big end bearings: Stage 2 = 90 degrees
7. Flywheel / driveplate = 60 Nm + 90 degrees (use new bolts / nuts)
8. Crankshaft pulley / damper centre bolt = 90 Nm + 90 degrees (use new bolts)


Nov 25, 2010 | Audi TT Cars & Trucks

1 Answer

Can you tell us the torque settings for a nissan RB30DET [Big End and mains and head bolts]


head bolts about 70lbs ,big end bolts use locktight and about 40lbs mains about 60 ,sorry if i am not very specific but you see i never use a torque wrench ,i sort of feel the stretch on the bolts threads ,

Apr 03, 2010 | 1993 Nissan Quest

1 Answer

I need the torque specs for the main and rod bolt for a 99 escort 2.0l engine


engine tightening torques
Main bearings Renew bolts/nuts No
Main bearings Stage 1 43 Nm
Main bearings Stage 2 85 Nm
Big end bearings Renew bolts/nuts Yes
Big end bearings Stage 1 15 Nm
Big end bearings Stage 2 90°

Jan 21, 2010 | 2004 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...