SOURCE: firing order of a daihatsu charade 3cyl 1995 model
If you find this Info Helpful Please Rate Me as It Helps me to reach the Expertise STATUS that I have Worked 30yrs to get to LoL Thank You Very Much and Have a Great Week!!
Firing Order: 1 - 2 - 3
Base Ignition Timing
Note: With the T terminal Shorted.5 +/- 2 deg BTDC
Ignition timing should be checked and adjusted, if necessary whenever spark plugs are replaced or any distributor maintenance is done. Ignition timing should be 3-7°BTDC at 750-850 RPM with the engine check connector terminal 11 (brown) shorted, Fig. 1. The engine check connector is located near the top of the transaxle.
SOURCE: daihatsu charade 2005 model tyre pressure.
28 psi minimum but to stop the edges wearing prematurely,inflate to 34 psi and the tyres will wear better,as long as your happy with the ride...shouldnt be too firm
SOURCE: daihatsu charade '98 oil filter.
have you checked your owners manual?
better for you to goto quick lube shop and get it changed
SOURCE: How do i fix a loose gear shifter on a daihatsu charade 2005 model
if it is a floor shift lever , there is a pivot pin in the lever ball / box tower that comes loose and allows for loose selection
on the end of the lever in the box there is a plastic cup that slides across the gate and these have been known to break or wear off
53 views
Usually answered in minutes!
×