What is the feedback of Hyundai Venue S 1.2 kappa model?

those are called TTY bolts, not to be reused.
TTY = torque to Yield.
1,2 liters.
The i10 also came with a 1.2 liter gasoline Euro 5 compliant engine (called the Kappa engine) DOHC petrol
real name (engine)

G4LA made in india.

sorry no books here on india cars.
contact Hyundai dealer in your country and get the service manual.

1. no country told, and matters huge.
2. no model car told, VENUE
3. no engine told the 1.0 turbojet ? not told exact engine.
4. no told the problem at all, with car,
5. PCM/TCM/BCM computers failing not told which one needs to be scanned, but pCM is first,
6. The car 2003 here in usa is OBD2, but is not outside USA.
7. this car is not sold in USA> so here are the rules outside USA for PCM scans, "communications"
8. https://www.scantool.net/blog/how-do-i-know-whether-my-car-is-obd-ii-compliant/

as you see our USA OBD2 is not used at all until many years later.
your car has a service manual SM that answers all your asked above.
read it first is best
what does computer feed lines, mean?
power 12vdc and ground.
inputs
outputs
or all?
but it is all in the SM. for your car and in your country at Hyundai. dealers.
good luck finding answers, lacking1 to 5 above.

see if this link helps you out.
I10 1 2 kappa engine cemsaft taiming posiosan Google Search

You should be able to change the shaft seal just by removing the half shaft.

Type into a search engine [Google, for example...] "firing order 2008 Hyundai Accent"....

Change full engine

I suggest visit this link and download the Santa Fe Owner's Manual
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Hi there:

DTC P1155 - A/F Sensor Heater Circuit Malfunction(Bank 2 Sensor 1)

This is a very common code and the front Air Fuel Ratio sensor located in the front manifold will need to be replaced and the codes cleared. Here is a very similar pic to your vehicle...



This is a V6 car so it has 2 heads. They classify Bank 1 as having cylinders 1,3 and 5 while Bank 2 has cylinders 2,4 and 6. The same would be for a V8 engine. 4 cylinder engines only have Bank 1...



Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.


Thank you for using FixYa.

jump car off, or charge battery, use booster pack, jumper cables, or replace battery.

Here is a diagram of you timing marks good luck and thanks for using FIX YA . please leave me a feedback.http://www.2carpros.com/car_repair_information/year/2004/make/hyundai/model/sonata/2004_hyundai_sonata_timing_belt_diagram_marks.htm