Your awd is automatic when wheel slips rear wheels engage no on off button / leaver if a light comes on It will come on and stay on to
indicate there may be a problem
with the drive system and service is
required. If the light stays on, it must
be reset. To reset the light, turn the
ignition off and then back on again.
If the light stays on, see your
dealer/retailer for service but check fuses and relays then abs system this is your owners manual https://www.manualslib.com/manual/149216/Saturn-2009-Vue.html?page=213#manual
SOURCE: 2003 Saturn Vue- will not go forward when put in drive, but backs
There is a major law suit against Saturn/GM to solve this.
SOURCE: I just had my wheel bearings replaced on both
Vues are bad for having all hub bearings make noise,check your rear ones.Or the ones you didn't have replaced.If it's all wheel drive check the propshaft center carrier bearing.Common to fail & make noise.hope this helps
SOURCE: Where is the back up light switch located on a 2003 Saturn VUE
It is located on top of the transmission. it is a black connector with 2 wires. The wire colors are Light Green and pink. Hope this helps
SOURCE: how to preform a tune-up on my 2009 Saturn Vue
It has a maintenance recomendation from the manufacturer for replacement of the spark-plugs at 100,000 miles. You don't list mileage or V6 or L4 cylinder. Make sure engine is cold because the cylinder heads are aluminum and can be damaged if plugs are removed hot or overtightened upon reassembly. Remove spark-plug wires and replace spark-plugs. Sometimes the wires break when you remove them and will require replacement. If you coat the inside of the wires where they connect with the plugs with dielectric grease it will help prevent the wires from breaking upon future disassembly.
SOURCE: 2009 Saturn Vue XE, ABS/TCS/Stabilitrak lights on.
The Wheel Hub Brg is 162.79 at Rock Auto.Com
The sensor 30 to $55.00
Start using Google,Rock Auto & You Tube Video-- to
educate yourself-- before approaching these repair shops
From what is see on Rock- the speed sensor is not part of
the bearing assy on any of the 4 motors
If you can't lay under there to replace your own sensor,
if that is the only problem,I don't have any more to say
You don't need a shop to do that
Have a neighbor or relative do it
241 views
Usually answered in minutes!
×