Question about Volvo Cars & Trucks

1 Answer

Immobilizer see manual showing on my 2005 Volvo s 60 t the alarm was set off n flashed for like 3 days n now it won’t make a sound to start . How do I reset immobilizer

Posted by Shannon Brown on

Ad

1 Answer

steve

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Volvo Master
  • 3,708 Answers

I would start with having the OBD read and any fault codes should be cleared and take it from there

Posted on Mar 26, 2020

Ad

5 Related Answers

twkd

  • 2 Answers

SOURCE: 2005 subaru outback immobilizer reset? Alarm was

This could be a few things. If the security system was enabled and you just unlocked the door with a key and not using the remote, then all you have to do is put the key in the ignition and turn on/off three times. That's it!

Some cars have immobilizer keys. The immobilizer prevents unauthorized keys from starting the car (yours may or may not have it, depending on the exact Outback model).


Look here for the different styles of immobilizer keys:
http://www.cars101.com/subaru/keyless.html#immobilizer keys

Posted on Jul 27, 2012

Ad
johnf1aresti

ARESTI

  • 1121 Answers

SOURCE: 2005 Volvo S40 Immobilizer

you need a scanner having your car's program and to do the alarm reset to reset the alarm.

Posted on Sep 03, 2012

johntunney

John Tunney

  • 887 Answers

SOURCE: Immobilizer won't reset on 2002 kia Rio

put fuse back in disconnect batt wait 60 seconds re attach, when the horn starts honking lock and unlock drivers door with the key while doors closed window down. get in car and start it, should be fine now.

Posted on Mar 13, 2013

ray gallant

  • 66956 Answers

SOURCE: 1997 Daewoo Cielo, How do I reset immobilizer

perhaps if you had included the make and model but you did not so call the closest dealer and ask them .

Posted on Apr 22, 2015

Testimonial: "Maybe you should read the Question. The Vehicle was a 1997 Daewoo Cielo. In case you didn't notice you still haven't answered the question just made remarks, so now. Here is the story again for you. I changed the Battery and if I turn the ignition on the alarm comes on. It does not have electronic locking, Sooo what is the answer I'm still waiting.?"

SOURCE: how do i reset a 1997 bmw 7 series immobilizer

If dash or radio display says "CODE"" IF SO USE RADIO NUMBERED PRESETS TO ENTER YOUR CAR CODE STD FACTOR USUALLY ONE OF THSEE THREE... 1234
0000
OR LAST 4 NUMBERS OF VIN NUMBER ADDED TOGETHER IE. IF LAST 4 OF VIN ARE 4755 ENTER USING NUMBERED PRESET NUMBERED PRESETS TO ENTER 0021. HOPE THIS HELPS I HAVE TO GET AN ORIG RADIO WITH PRESETS PREVIOUS OWNER CHANGED TO HIGH DOLLAR ONE AND HAD NO PRESETS NOR CONNECTED TO DIAGNODICS DISPLAY/ ON DASH AT BOTTOM IN MIDDLE.

Posted on Feb 27, 2019

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset immobilizer on 2001 volvo s60


Hi. Here are directions to reset your immobilizer. The ignition switch has for positions. You will be using two (Accessory and Run). NOTE: Do not start the engine during the reset procedure.

NOTE: Look at your gauge cluster and identify the trip display and reset button.

(1) Turn the ignition switch to the accessory position.
(2) Set the trip reading to TRIP 1 (T1) and push and hold the trip reset button.
(3) While holding the reset button, rotate the key to the RUN position.
(4)Hold the reset button until you see the triangle in the dash flash yellow. Once this starts flashing remove your finger from the reset button. Shut the car off, verify light is out. repeat once if necessary.

Jul 10, 2018 | Volvo Cars & Trucks

2 Answers

Our saab was driving fine, we parked and went shopping after an hour came out and it wont start. Replaced the battery and it still wont start. It is a manual so we are able to pop the clutch and it...


Sounds like an immobilizer/alarm issue...only way to properly diagnose is with a Saab factory scan tool...unfortunately..
Try another key if you have one....also lock and unlock the vehicle a few times with the key fob...or door key to insure the alarm/immobilizer has been turned off.

Hope this helps!

Scott, Porsche Master Tech 35 years.

Jan 12, 2014 | 2003 Saab 9-3

1 Answer

Immobilizer won't reset on 2002 kia Rio


put fuse back in disconnect batt wait 60 seconds re attach, when the horn starts honking lock and unlock drivers door with the key while doors closed window down. get in car and start it, should be fine now.

Mar 12, 2013 | 2002 Kia Rio

1 Answer

96 volvo 850 won't start and horn and turn signal chirp on and off


My wife ran into this problem one day when she came out of a store. Turns out the car alarm had been set off in her absence, and the alarm system had immobilized the car. The solution was to simply use the remote (rather than the key) to unlock the car. That cleared the immobilizer, and she started it up and drove off.

Feb 13, 2013 | 1996 Volvo 850

1 Answer

Lost key and alarm dodge caravan


to reprogram new key first you need to use 2 factory program keys.place first factory key in the ignition first turn ignition on for 3 seconds. then turn off ignition then install second factory in the ignition on position for 10 seconds.when immobilizer warning lamp begins to flash a acoustic signal is emitted.within 60 seconds. switch ignition off and remove key.then insert new key and switch on for 10 seconds a acoustic signal is emitted and immobilizer warning lamp remain illuminated for 3 seconds indicating programming completed.if all fails dealership has to reprogram new keys.

Dec 17, 2012 | 2000 Dodge Caravan

2 Answers

2005 Volvo S40 Immobilizer


you need a scanner having your car's program and to do the alarm reset to reset the alarm.

Aug 28, 2012 | 2005 Volvo S40

1 Answer

I have problems with my dodge grand caravan 2005 won,t start an show this code p0513


P0513 - Incorrect Immobilizer Code
Possible causes- Open or short immobilizer circuit
- Poor electrical connection for immobilizer circuit components
- Faulty immobilizer control unit
- Faulty immobilizer key
- Faulty immobilizer key antenna

Read more: http://engine-codes.com/p0513.html#ixzz24sUqroQI

Aug 28, 2012 | 2005 Dodge Caravan

2 Answers

Car won't start


Your immobilizer is enabled. Try locking/unlocking the doors with the remote five (5) times, this should remedy.

May 31, 2009 | 2006 Volvo S40

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...