Question about Ford Cars & Trucks

1 Answer

Engine Head torque specs for 2013 Ford Transit 2.0l

Posted by Terry on

Ad

1 Answer

Attique-ur-Rehman

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 2,677 Answers

Https://www.youtube.com/watch?v=DYFwfYsToRE

Posted on Mar 27, 2020

Ad

5 Related Answers

Anonymous

  • 25 Answers

SOURCE: 87 samurai bolt torque specs for engine

The haynes book is not recommended since there are numerous mistakes and they still will not update. One of the biggest is the firing order.

The factory service manual is the only way to go.

Head bolts - 46 - 50.5 lbs (there is an order sequence for the bolts)

Intake & exhuast manifolds- 13.5 - 20 lbs

Flywheel - 41.5 - 47 lbs

Clutch cover - 13.5 - 20 lbs

Posted on Mar 17, 2009

Ad

Anonymous

  • 783 Answers

SOURCE: Head bolt torque specs needed for 96 tbird 3.8

Head bolts are torque to yeild so you MUST use new bolts.
Tighten cylinder head retaining bolts in numerical sequence in three steps as follows:

  1. 20 Nm (15 lb-ft).
  1. 40 Nm (30 lb-ft).
  1. 50 Nm (37 lb-ft)
Loosen retaining bolts one at a time two to three revolutions and retighten as follows:

Long bolts:
  • Tighten to 40-50 Nm (30-37 lb-ft).
  • Rotate an additional 175-185 degrees.
  • Go to next bolt in sequence.
Short Bolts:
  • Tighten to 20-30 Nm (15-22 lb-ft).
  • Rotate an additional 175-185 degrees.
  • Go to next bolt in sequence.
Here is a pic of the sequence
http://i253.photobucket.com/albums/hh43/chuck943/Headboltsequence38L.gif

Posted on Mar 19, 2009

SOURCE: need torque specs for a 85 s10 chevy with a 2.5 engine?

here you go!

1dd4f4a.gif93a64e1.gif

Posted on Jun 21, 2009

Anonymous

  • 1392 Answers

SOURCE: head bolt torque spec

Always use new head bolts.
1)tighten to 40ft/lbs
2)back off 1/2 turn
3)tighten back to 40ft/lbs
4)tighten an additional 90 degrees
5)tighten an additional 90 degrees.

Posted on Aug 16, 2009

Anonymous

  • 233 Answers

SOURCE: 94 mazda B3000 3.0L cylinder head torque specs

Step 1 torque to 59 ft pounds
2. Loosen one full turn
3. 37 ft pounds
4. 68 ft pounds

Use torque sequence below
aca9f77.gif

Posted on Sep 17, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

TORQUE SPEC AND SEQUENCE 2013 FORD FIESTA CYLINDER HEAD

This for 1.6 liter engine, some of these specs are in lbs, other is ft lbs. Hope it helps.
cylinder head-024mk0wktbb2odgalfho0nq3-4-0.jpg
0helpful
1answer

Ford transit mk 5 1998 Torque Cylinder Head Bolts & Pattern

york 2.4 engine ? if so start in the middle and work your way outwards one either side at a time .torque non turbo around 80lbs .
0helpful
1answer

98 ford windstar intake manifold torque specs

Intake torque specs ' FordForumsOnline.com

www.fordforumsonline.com > Ford Tech Forums > Engine & Drivetrain

May 7, 2010 - 2 posts - ‎2 authors
ISO torque specs for the intake & plenum for a 98 Windstar...3.8 with the ... Our community is here to help you with any questions you have related to your Ford. ... Lower Intake Manifold to Cylinder Head Bolt 8-12 - (71-106).

Torque Specifications - AutoZone

www.autozone.com/.../Ford-Windstar.../Specifications/Torque-...

AutoZoneAutoZone Repair Guide for your 2004 Ford Truck Ranger 2WD 2.3L MFI DOHC 4cyl Engine Mechanical Specifications Torque Specifications. ... Ford Windstar 1999-2003 ... Bolts, Main Bearing Bolts, Rod Brearing Bolts, Crankshaft Damper Bolts, Flywheel Bolts, Manifold. Intake, Exhaust ... Vehicle: 2008 Ford F150, 98 Civic.
0helpful
1answer

2008 dodge charger with a 2.7 liter engine head boly specs

  1. 2.7 litre intake bolt torque spec in a 2008 dodge charger ...

    www.fixya.com/cars/t18664111-2_7_litre_intake_bolt_torque_spec_in Jun 27, 2013 - Head Bolts Step one 37 ft lbs then tignten 120 degrees more. Rocker arms. Step one 11 ft lbs then tighten 90 degresss more. Upper intake 89 inch ...
1helpful
1answer

1998 ford ranger bolt torque specs for engine

If you want the torque specs on every single bolt on your engine, your throwing a wide loop. Can you narrow it down to a single component? As an example, if you want cylinder head torque specs, I might be able to find that, if you give us the engine size?
Some libraries carry automotive databases, they should have some torque specs.
0helpful
1answer

2006 ford ranger head tightening sequence

Tightening the head bolts is the same on any vehicle. Start from the middle and work your way to each end, crossing back and forth and out from the middle, going back and forth between each end. Don't tighten all at once and make sure to have your torque specs for your engine. first, snug, then tighten firm, then torque to spec. This diagram is for reference only. Make sure to get torque specs for your engine.0b61846.jpg
0helpful
1answer
1helpful
2answers

NEED FORD 2.2l head gaskets torque chart

Tighten the head bolts 29 to 32 ft lbs , then tighten again to 59 to 64 ft lbs
Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

206 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

Greg Bernett
Greg Bernett

Level 3 Expert

2993 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14871 Answers

Mike

Level 3 Expert

4377 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...