Question about Mazda Cars & Trucks
Posted by Anonymous on
The hold light flashing indicates a fault.. It may be flashing out an error code which can tell you what is wrong.
If it is just regular flashing, you will need an OBDII reader to extract the fault code, this will tell you what is wrong.
Posted on Feb 14, 2020
it seems that the gear bushings have worn out. you need to take your car to a mechanic to have the bushings changed. Also, please check it your car has enough Automatic Transmission Fluid.
i am always here
Posted on Mar 10, 2009
SOURCE: mazda 626
had the same problem in my car. the transmission may over heated and its blown the overdrive. it could also be the trans cooler playing up or finally the cam belt may have skipped a few notches. DONT run the engine get a repair man to come to you. if its the cam belt running the engine can damage the cylinder heads and then it becomes real expensive, they're all relitivly easy to fix.
Posted on May 01, 2009
Tips for a great answer:
Jul 18, 2016 | 2004 Mazda 3
Nov 14, 2015 | 2005 Chevrolet Aveo
Nov 26, 2014 | Cars & Trucks
Jan 06, 2011 | 2003 Mazda Mazda6
Mar 24, 2010 | 1993 Mazda MX-3
Jul 12, 2009 | 2005 Mazda 6
Jul 02, 2009 | 2001 Mazda Millenia
Dec 06, 2008 | 1998 Mazda 626
Usually answered in minutes!