Question about Toyota Cars & Trucks
SOURCE: how do i do an oil change
I believe you can find some guidelines in the following free download, good luck!:)
Brakes, Wheels & Tyres
Central Locking Stuff & Alarms
Electrical System & I.C.E
Fuel & Emissions System
Suspension & Steering
Estima Owners Handbook
Download (~50MB): http://www.mediafire.com/?yx9wiypm6t2
Posted on Jul 25, 2009
I have had the same problem and am fairly sure it is the glowplug not working (I haven't tested it yet). The cylinder with the dead glowplug keeps filling with fuel until it gets hot enough to start burning it, in which case it is very rich and therefore smoky. Once it runs for a while it burns the excess fuel off and runs fine. If it were any other cause the engine wouold not retain its normal power etc when hot. The lumpy running indicates that it is related to one or two cylinders only.
Posted on Aug 20, 2009
It may be the starter motor contacts which are worn. I have done this twice (on 2 different estima's myself. The starter will not turn or not properly. New contacts for these Denso starters are available on ebay from nipponnev for about £10 delivered and take about 1 hour to fit. No need to buy another starter. Hope this helps. Regards, Paul
Posted on Jan 15, 2010
Undo front coupling first and slide shaft towards the rear of the vehicle. Just enough room then to slide the front coupling downwards may need to use hammer on old front coupling.
Replace front coupling. Replace rear coupling.
Posted on Mar 15, 2010
Tips for a great answer:
Jul 19, 2014 | 1992 Toyota Previa
Mar 03, 2013 | Cars & Trucks
Jan 04, 2010 | Toyota Previa Cars & Trucks
Aug 30, 2009 | 1997 Toyota Previa
Jul 29, 2009 | 1994 Toyota Previa
Jan 28, 2009 | 1993 Toyota Previa
Oct 05, 2008 | 1993 Toyota Previa
43 people viewed this question
Usually answered in minutes!