Question about 1989 Ford F 150

2 Answers

Replacing accuater pin on a 89 f150 - 1989 Ford F 150

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 9,237 Answers

Hello
u will find a lot of wiring diagrams and circuit diagrams help books and stuff like this at reliable-store.com
they can help u instantly... im a frequent buyer there since Im a mechanic so take help from there

Posted on Nov 13, 2019

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 1,774 Answers

Are you talking about the door lock actuator please specify what it is your looking for

Posted on Nov 13, 2019

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace seals in front axels of a 89 jeep wrangler with vacuum accuater


double anon posted, why?
back up and read. answsers in your post 1

Sep 28, 2014 | 1989 Jeep Wrangler

1 Answer

89 gmc f150 v6 chugging out like its gona die


F150 is a Ford model truck, not GMC.
But at any rate, since I don't know if you have a Ford F150 of some kind, a 87 GMC S15 or some kind of 89 GMC with a V6 I will suggest taking the ignition module to an Auto Zone and having them test it (A free service). Also test the fuel pressure.
If a tune up and fuel filter has not been done in some time that could very well be an issue.

Sep 25, 2011 | 1987 GMC S-15 Pickup

1 Answer

I need to change the lower ball joint on my 89 f150 4x4 how do i do it


remove brakin system(caliper pads rotor) then disconnect outer tie rod, remove cotter pins on both ball joint nuts and remove nuts, then separate hub from i-beam, on the bench remove spring clip holing ball joint and press out, press in new joint and install hub in reverse order of dissassembly, apply grease to axle regrease bearings and caliper sliders, you will need a ball joint separator and a ball joint press, use new cotter pins

Sep 16, 2010 | 1989 Ford F 150

1 Answer

Throttle position sensor 89 f150? can i fix this


You only need general tools. It is located beside the throttle body. It would be much easier to take off the throttle body first.

Jul 12, 2010 | 1989 Ford F 150

3 Answers

2004 F150 WILL NOT GO INTO 4 WHEEL DRIVE


the first thing to do is to have the trany computer scanned for codes, the code will help alot in pin pointing your problem,you can try autozone they scan for free, these trucks that ive worked on.one had a bad 4wd transfer case selector motor, and another had bad front wheel locking hubs, these hubs are vaccum operated and go bad often the diafram rips on most of them.

Mar 01, 2010 | 2004 Ford F150

1 Answer

On the fly 4x4 will not disengage 98 ford f150 fuses are good


sounds like the accuator on either the t case or front diff

Feb 24, 2010 | 1998 Ford F150 Regular Cab

1 Answer

My 89 f150 lacks all power


SOUND LIKE FUEL FILTER STOPPED UP.

Feb 15, 2010 | 1989 Ford F 150

2 Answers

Problem with starting 89 F150 straight drive. Ignition or clutch?


Sit up on the clutch paddle, follow the clutch paddle up under the dash, the rod that goes through the fire wall to the clutch master cylinder, sit around that rod, will have a six pin connector going to it.

Dec 26, 2009 | 1989 Ford F 150

1 Answer

I have a 05 F150 FX4 4x4...Problem is the 4x will not engage..I think I've checked all the fuses, not sure. could it be anything or anyplace else?


check the switch under the hood. right hand side on the fire wall just under the wiper cowl. this happened to me. ford says water from the wipers leak on the switch and shorts it out. they replaced the switch and losely put a plastic over it to keep the water out. make sure not to put the plastic too tight, it is vacuum , so it needs to breath. Also check the front wheel accuators that engage the front end(next to the wheels), ford had some bad accuators that would not hold the pressure this to also happened to me. ford should pass it on a goodwill warranty. hopefully nothing else is broken. cost me $500 because i damaged the wheel bearings. ford won't pay for those.

Jan 26, 2009 | 2004 Ford F150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...