Question about Cars & Trucks

1 Answer

How can i bypass my transponder of my vw because my ignition domt want to turn to start

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 15 Answers

Either replace your ignition barrel or take wiring out and install a flick switch.

Posted on Nov 08, 2019

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

James Young

  • 4044 Answers

SOURCE: i bought a 2003

Problem is you can't. It actually is possible if you have about $2000 to replace the on board computer and the ignition. It is much cheaper to go to the dealer and order the correct key and have it cut.

Posted on Dec 27, 2010

john h

  • 22486 Answers

SOURCE: 2000 Saturn s four speed I lost mykey I drilled ignition didn't work went to junk yard and to let u know my old one has a. Transponder anyway found one at no transponder how can I bypass that

no bypass --what you should have done was go to dealer with vin and proof of ownership and had a key cut using the vin number --when you drilled out the cylinder did you damage the wiring and other electronics and linkages --you need a transponder unit [which will need to be flashed to your vehicle ]because your computers are set up and designed with the transponder type set up --

Posted on Sep 26, 2016

toddgilbert7

toddgilbert

  • 6360 Answers

SOURCE: Can you tell me how to bypass transponder from ignition on a vaxhall astra

At www.reliable-store.com get complete guide on whether to repair or
not, service it, and how to repair etc, along with wiring diagrams, electrical diagrams, torque specs, error codes, everything.

Posted on Mar 13, 2018

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can i bypass the ignition safety lost key 01 ford escape xlt


Sorry you can't. Ford's suck because you have to have two keys to reprogram the security to the keys. Last one I had done cost about $200. Dealer only.

Nov 29, 2015 | Ford Cars & Trucks

2 Answers

Will car turn over with bad transponder


Hi Dave many do turn over it just stops the fuel or spark or both. Regards Jim...

May 21, 2015 | Cars & Trucks

1 Answer

How do I bypass the immobiliser on mitshebushy l200


If you are looking to bypass the immobilizer permanently that is not an option. If you are installing a remote starter there are several options if you have the proper transponder key. Some company's offer bypass modules that can be programmed to the vehicle if you have 2 transponder (chip) keys. If you have only 1 key you can have it cloned and put into a device that is known in the industry as a key coffin. This device couples the signal from the coded key in the coffin into a loop or coil of wire wrapped around the key cylinder when enabled to let the car start without the transponder key in the ignition. Look for remote start bypass modules on the internet th find one for your car.Some devices can be flash programmed to your vehicle again if you have the transponder key or keys. Otherwise the only way to bypass it is with the proper factory scan tool available to dealers this is only temporary.

Dec 04, 2014 | Cars & Trucks

1 Answer

Vw beetle does not start. seems like its some kind of anti theft protection. the car/key icon lights up, it turns over for a second , then off. this is the first time this has happened, but we bought it...


First of all you need to programm all ignition keys using suitable diagnostic equipment (VAS, VAG-Com) connected to the data link connector of the car.

You have an electronic immobilizer key recognition problem. Now your key chip is not recognized by the transponder antenna fitted on the ignition switch barrel.

  • Everytime when you had a new key you must programm all available ignition car keys before trying to start the engine with this new key !!!
  • $(".author").find("img").brokenImage({ replacement: "http://c.fixya.net/fixya20/images/icons/expert-not-found.jpg" }); function ToggleComments(obj,id) { $("#solutionComments_" + id).find(".thComment").show(); $(obj).hide(); }

    tdisline_775.jpg

    This warning lamp indicates that the engine is locked by the immobilizer system, and the engine start sequence must be repeat again.

    From year 1995 in Audi-VW (VAG) cars is used engine immobilizer. The VAG group immobilizer system consists of an immobilizer ECU which controls the recognition of keys and the Engine Management ECU system. Immobilizer is activated when the ignition key is removed and, together with the engine control unit, largely prevents unauthorized starting of the engine. The system uses a transmitter and receiver unit in the ignition key (transponder). Whenever an attempt is made to start the engine, it transmits a new code to the car's electronics. The immobilizing is only cancelled and car motor electronic receives permission to start engine if the key sends a right authorization code.

    tdisline_776.jpg

    Oct 15, 2011 | 1999 Volkswagen Beetle

    1 Answer

    I have a 1996 2.0 litre galaxy petrol.I turn the ignition switch,car starts but cuts out after two seconds.The immobiliser light on the drivers door comes on when I start the car.Cental locking works...


    Hi Bernie
    Classic symptoms of transponder fault. Effectively the car is not recognising your key. Try another key if yoiu have one. If same with both keys, then need to check transponder ring and wiring.No bypass I'm afraid....even if there was, could not post due to insurance implications.

    May 30, 2011 | Ford Transit Connect Cars & Trucks

    1 Answer

    I bought a 2003 vw gti mk4 and the key i got with it dont have the chip or transponder in it the car will start then die i want to bypass the system how do i do that


    Problem is you can't. It actually is possible if you have about $2000 to replace the on board computer and the ignition. It is much cheaper to go to the dealer and order the correct key and have it cut.

    Dec 27, 2010 | Volkswagen GTI Cars & Trucks

    1 Answer

    My anti theft alarm goes off and makes it to where I can't start my car how do i bypass this


    You can't do it; the Theft System it's integrated to the vehicle control computer ECU/PCM; you need install one INTERFACE to make this work.

    Review this Wiring Diagram and this comment: when installing a 791 TRANSPONDER BYPASS System on this vehicle it will be necessary to remove the BOTTOM STEERING COLUMN Cover and IGNITION SWITCH TUMBLER to gan access to the Factory Transponder System around the Ignition Switch. To do so will require that you first look at the bottom of the STEERING COLUMN COVER to identify the screw holes from the IGNITION SWITCH TUMBLER RELEASE PIN HOLE, that is required to remove the Ignition Switch Tumbler, the IGNITION SWITCH RELEASE PIN HOLE is the SMALLEST Hole in the plastic cover in this picture. NOTE *** to remove the IGNITION SWITCH TUMBLER, a TORX #15 Bit on a Screw Driver will work just fine. Incert it up into this hole and press, at the same time, turning the IGNITION SWITCH ON and the Tumbler will pull out at the same time. This Must be done to remove the IGNITION SWITCH TUMBLER so that the BOTTOM Steering Column Cover can be removed to gain access to the TRANSPONDER SYSTEM built around the IGNITION SWITCH.

    Also, its possible that you need other details from the Taurus's Owners Manual.

    Hope helps.

    Jun 01, 2010 | 1996 Ford Taurus

    1 Answer

    My remote start will not work. The engine starts


    It is probably the transponder bypass. Try this: Put a key in the ignition (do not turn on or to acc, just put it in) and hit the remote starter remote. If it starts, your transponder bypass is bad. I had this same problem. I have not been able to find just this part from Chrysler (you might).

    You can purchase two types of bypasses. One actually uses a transponder key inside. The other is a computer chip that is programmed just like the transponder key. Your choice. Just do a search for "transponder bypass" and do a little research.

    I used the TBKIII. Key & unit added up to $21.00. However, it only works with remote start. If I try to start with the key, it shuts down because it is picking up the key and the key in the bypass. Unit has a bypass for this, but I still have not found the correct answer to make it work. Good luck.

    Mar 01, 2010 | 2005 Chrysler Town & Country

    1 Answer

    KEY WONT TURN IGNITION


    Your car uses a transonder key, a key with a small chip embedded inside. The transponder is matched to the immobilizer unit in your car. When the key is inserted into the ignition, the immobilizer searches for that transponder, if it's not near the ignition, the car will just keep turning over and not start. Your only real options are to replace the steering lock or buy a transponder bypass unit, which I do not recommend. Just do a google search.

    Aug 09, 2009 | 2003 Honda Pilot

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    13 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    Marvin
    Marvin

    Level 3 Expert

    85206 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22484 Answers

    john h

    Level 3 Expert

    22486 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...