Question about Cars & Trucks
Posted by Anonymous on
The haynes book is not recommended since there are numerous mistakes and they still will not update. One of the biggest is the firing order.
The factory service manual is the only way to go.
Head bolts - 46 - 50.5 lbs (there is an order sequence for the bolts)
Intake & exhuast manifolds- 13.5 - 20 lbs
Flywheel - 41.5 - 47 lbs
Clutch cover - 13.5 - 20 lbs
Posted on Mar 17, 2009
Head bolts are torque to yeild so you MUST use new bolts.
Tighten cylinder head retaining bolts in numerical sequence in three steps as follows:
Posted on Mar 19, 2009
Tips for a great answer:
Jan 18, 2016 | Cars & Trucks
Nov 29, 2015 | Cars & Trucks
Mar 22, 2015 | 1995 Chevrolet Beretta
Oct 17, 2014 | Cars & Trucks
Fig. 7: Location of the cylinder head retaining bolt holes
Fig. 13: Cylinder head bolt torque sequence for 2.2L engines
Tighten bolts in sequence, tighten the long bolts to 46 ft. lbs. (63 Nm) plue 90 degrees. Tighten the short bolts to 43 ft. lbs. (58 Nm) plue 90 degrees.
Mar 18, 2011 | Chevrolet Cavalier Cars & Trucks
Mar 30, 2010 | 1999 Pontiac Grand Am GT
Oct 05, 2009 | 2003 Mazda Mazda6
Feb 07, 2009 | 1994 Oldsmobile Cutlass Supreme
14 people viewed this question
Usually answered in minutes!