Question about 2005 Chrysler Pacifica

Open Question

Location of NVLD assembly on a 2005 chrysler pacifica, 3.5 engine, 2 wheel drive

Posted by richard carzoli on

Ad

5 Related Answers

hotrodtod38

Todd Bradshaw

  • 141 Answers

SOURCE: Brake fluid reservoir on a 2005 Chrysler Pacifica

WHEN YOU OPEN YOUR HOOD LOOK DOWN THE DRIVER SIDE FENDER THEN LOOK LEFT ABOUT 10 INCHS AND YOU SOULD FIND IT IT WILL BE WHITE IN THE ENGINE COMPARTMANT AREA

Posted on Feb 14, 2009

Ad

Anonymous

  • 2 Answers

SOURCE: Where are the spark plugs located in a 2005 Chrysler Pacifica?

Jay from Ma,
You have it backwards the rear three are accessable with the front three being under the intake. To remove the intake simply remove throttle body and aproxamently 15 other bolts.

Posted on May 08, 2009

Ad

Anonymous

  • 18 Answers

SOURCE: program instruction garage door opener in 2005 chrysler pacifica

if your garage motor have rolling codes you need to put your car inside garage near the motor leave ignition on go to the motor locate learn button press it then quickly go to the car and press and hold one of the buttons for approximately 30 sec or until it start blinking rapidly, if you have a regular motor take one hand held opener go inside car ignition on same time press open button on handheld remote and on the car button 30 sec and it should be programmed.

Posted on May 18, 2009

jturcotte

Jeffrey Turcotte

  • 8984 Answers

SOURCE: where can I find a

3.5L engine?

8fe7d61.gifd8f14c0.gifac805da.gif

Posted on Oct 01, 2010

leedavidian

Auto Repair Help

  • 1420 Answers

SOURCE: where is the oil sending unit located on a 2005

Welcome to FIxYa.com



Right above the oil filterleedavidian_4.jpg



Thank you for using FixYa.com

Regards, Lee Davidian

Posted on Nov 18, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Where is my TCM located in my 2004 Chrysler Pacifica all wheel drive


its located near the battery , generally inside front bumper driver side

May 25, 2017 | 2004 Chrysler Pacifica

3 Answers

Where is the abs speed sensor located on a 2005 pacifica?


Behind each of the front wheel hub

Have to follow the wires to find the rear sensors

The internet should have a picture,easier to just look under the car

Jun 10, 2014 | 2004 Chrysler Pacifica

1 Answer

How do i remove a seized up rear wheel bearing on a 2 wheel drive 2007 Chrysler Pacifica Touring


How do you know its the bearings.

Aussuming the car is front wheel drive, what happens when you try to drive it? Does it drag the wheel? There is a chance it may break it free since you've gone over it with a slege hammer.

Mar 12, 2014 | 2007 Chrysler Pacifica Touring

1 Answer

Had engine light on and running ruff. Had code checked at auto parts store and it shows misfire on clyinder 2. How do I locate cylinder number 2 on a 2004 Chrysler 6 cyl Pacifica


Most front wheel drive V6 chrysler engines are as follows: standing on passenger side of car facing engine, cylinders 1-3-5 are on the left bank, cylinders 2-4-6 on the right. Standing at the hood facing engine (front of car) #2 is on your left front corner of engine. Change / check plugs and wires before doing and deep sensor testing.

Jun 11, 2011 | Chrysler Pacifica Cars & Trucks

1 Answer

I need a diagram for a serpentine belt 3.8 engine


Hi kimberly_40

here is the belt layout for your 2005 Chrysler Pacifica


FIG : Accessory drive beltrouting: -3.5L engin b> (1) Alternator (2) Automatic Tensioner (3) P/S Pump (4) Idler Pulley (5) A/C Compressor (6) Crankshaft Pulley

imbmetz1_5.gif
let me know if you need anything else

Bill
EX f31817b.gif

Standing Member of G.O.T.
imbmetz1_3.gif

Feb 19, 2011 | 2005 Chrysler Pacifica

1 Answer

Removing the rear hub/bearing assembly on a 2 wheel drive 2005 pacifica.


how to rbleeplas rear hub assbely how to removed hand beake cable from
hub

Nov 19, 2010 | 2005 Chrysler Pacifica

1 Answer

Location of pcm on 2005 pacifica?


I have a 2004 Pacifica and mine is on the drivers side front, underneath between the bumper and the wheel splash guard. You will need to remove the splash guard ti access the PCM. Not very hard at all. Replacement time for a handy DIYer: about 1/2 hour. Good luck!!

May 12, 2010 | 2005 Chrysler Pacifica

1 Answer

Chrysler Pacifica ABS on


Not long at all, there located in each wheel. Worst case is about an hour per sensor...

Nov 05, 2009 | 2005 Chrysler Pacifica

1 Answer

Replacing 2005 pacifica flywheel


Not on front wheel drive unless your hands are no bigger than an infants hands

May 27, 2009 | 2005 Chrysler Pacifica

Not finding what you are looking for?
2005 Chrysler Pacifica Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...