Chrysler intrepid 2003 obd 2 code P0441

2002 Dodge Intrepid Ignition Coil Circuit Codes: Electrical ...

www.2carpros.com/.../dodge-intrepid-2002-dodge-intrepid-ignition-coil...
Aug 13, 2008 - 2002 Dodge Intrepid 6 cyl Front Wheel Drive Automatic 130000 miles. Getting the following codes. P0353 P2302 P2305 P2308 P2311 P2314

What are 2002 Dodge Intrepid trouble codes PO442 and ...

www.answers.com > ... > American Cars > Dodge > Dodge Intrepid

What does the Error Code P0846 on 2002 Dodge Intrepid mean? .... Trouble code P2314 means: Ignition coil E, secondary circuit - malfunction Trouble code .

had same car with 2.7 engine engines from dodge had a lot of issues as for as the shifting issue it is most likely the govenor solenoids inside the transmission another common problem most shops that mess with transmissions charge anywhere from 300 to 500 to fix the shifting issue

Kevin, It sounds like you have several things going on. You first code P0770 did not pull up on my database,. The P0441 is for an evaporative leak in your fuel purge system. Vapors are continually pulled from the fuel tank on later model fuel injected vehicles. A leak in this system such as a damaged hose, loose gas cap, etc.. can trigger one of these codes.

Your last 2 codes are relating to a transmission solenoid fault. Hopefully, this will head you in the right direction.. Best of luck..

Yep the P0441 is : The evaporative emission control bad purge flow. You wont be able to run the component test for this issue without a good scan-tool of component tester. It may have to do with the flow control valve. It should be located next to the charcoal canister.

EOBD AND ISO CODE P0441 IS EVAPORATIVE EMMISSION SYSTEM INCCORRECT PURGE FLOW

Anytime a Chrysler product of this year has a check engine light, get it to a dealer immediately. The 2.7 liter engine is notorious for oil sludging. This can be a dangerous problem that can destroy the engine.

Your problem may have nothing to do with oil sludging, and I hope it doesn't; but don't take a chance.

Google "Chrysler engine oil sludging."

Hi
code P0068 = MAF/MAP sensorthrottle position correlation
code P0108 = MAP/BARO circuit high input
code P0441 = EVAP emission control system purge flow fault
take it infor a service
cheers Rob.

Code P0441 = evap code (auxiliary emissions control systems),You could try replacing the fuel cap first (make sure it has the double gasket), but most likely the charcoal canister has failed or you have a leak in a hose related to the evap system.

It is located near the center console. Here is a picture.

P0152 is o2 sensor 2/1 voltage high. Sensor 2/1 is your right bank upstream o2 sensor located in the manifold. Make sure it is pluged in.