Question about 1999 Chevrolet Lumina
We put in a brand new ignition switch in our 2003 chevy impala and the car will not start when we try to crank it the security lights justs flash what can we do.
After you replace the ignition switch turn the key to start the car and release leave the key were it stops after trying to start wait 10 minutes until security light goes out turn key to full off position then repeat the above procedure two more times for a total of three on the 3rd attempt to start car wait for light to go out then turn key to full off positoion wait 10 seconds then try to start car body control module should learn new pass code and the car should start.
Big john, [email protected] Automotive
Posted on Mar 02, 2010
First turn switch off.make sure battery is fully charged.then crank the engine .it might start for1 or 2 second then shut of do not turn the key off after engine turns off ,leave the key on till security light goes off or glows steady.then try to start .you may have to wait 10 to 15 minutes after leaving the key to on posisison.
Posted on Sep 15, 2009
Tempory fix is to relearn security sensor (passlock sensor) will need to replace ignition clinder
Posted on Nov 27, 2009
Tips for a great answer:
Aug 16, 2014 | 2003 Chevrolet Impala
Jul 14, 2014 | 2003 Chevrolet Impala
Dec 06, 2017 | 2003 Chevrolet Impala
Mar 28, 2017 | Chevrolet Impala Cars & Trucks
Apr 15, 2011 | 2003 Chevrolet Impala
Feb 15, 2011 | 2003 Chevrolet Impala
Jan 24, 2010 | 2004 Chevrolet Impala
2,697 people viewed this question
Usually answered in minutes!